step

Step 1: Buy a rope Step 2: Hang yourself Actually, just pull the engine out. It might be easier. The inner cover bolts could only be accessed with an allen wrench. 1/4 turns at a time all the way out. Then the timing chain pulled the new gasket off when I tried to install the cover over...

So, I am planning on changing the oil in my new bike just to be safe before the winter season, I have a pic of what I think is the drain plug, can you guys let me know if I've got the right part? :) Just want to make sure before I go cranking on it. Joe

Where is the step by step for the water pump rebuild with photos? I've searched my brains out :bang head: and can't find it. I'm trying to get all my info together for this winter's downtime. I thought this rebuild would have been made a "sticky". so far have the shift segment info together and...

Google is handling the Skynet tech side... and now we got this. Pretty cool actually. ‘Terminator’ polymer can spontaneously self-heal in just two hours. http://www.extremetech.com/extreme/166656-terminator-polymer-can-spontaneously-self-heal-in-just-two-hours

Here is a small batch of parts I just did. Now I have to put it all together ..... Todd

Back coils are easy so no instructions needed (remove seat-thats about it) Front coils are a bitch. Even worse when you find a PO was there before you and fu the screw heads. I can rebuild an engine faster the I can swap out the front coils. SO heres how you do the fronts 1 put key in...

OK. Bike starts with no issues. I wanted to test the radiator fan, though, so I let it idle in the garage (no rear wheel on yet) to see when the fan was going to come on... well. It DIDN'T... EVER. I had to go grab a box fan and aim it at the radiator to keep it from going past the first red...

I just wanted to post that I am in the process of creating my idea of a VMax as a muscle bike, I am sure that many out there will state that it already is, and you are right I am just putting my refining touches on what is there. For me a muscle bike needs to have: Power, Sound, and Looks. Two...

Well I got the new relay in today and plugged it in cranked the bike up and still have no tach. and no power to the fuel pump when the bike is running. When I first turn the key on the fuel pump will run for the designated 5 seconds and shut off but once the bike is running I have no power to...

Alright guys, Its done! I FINALLY got around to ordering and recieving my one seater conversion from Exactrep in England! I think it really put the brass knuckles on my "street fighter" (definitions of street fighter vary) and I got to put on my license plate holder finally too! So heres my...

Ok now that I have the front end suspension and braking the way I want it, I can see behind me and I'm happy with my new turn signals it is time for the next phase, making the carbs and engine more user friendly. This will means getting rid of the flatslides and all that came with it that I...

So I read up on Cop Runner?s light mod and decided it was a great idea. The install was easy, but somewhat more complicated than I anticipated, so I thought I?d add a step-by-step with pics just in case anyone has had this on the backburner. It takes less than half an hour and is totally worth...

Is there a thread on here that goes through cleaning out your carbs step by step. I have done the Shotgun twice, Peashooter once, opened up the bowls and shot carb cleaner on the float needles as well as in their seats. I?ve got an 07 MAX with 1445 miles, with K&N filter, Supertrapp slip-ons...

So what options do I have with a '94 Vmax wanting to run a two step without replacing the entire ignition system? Dynatek was nice enough to include this feature on the pre '90 model ignitions, but the newer ones are screwed. What has been done out there? :bang head:

Does anyone have pictures of installing progressive front springs? Im looking for a step by step for a disassembled and reassembled of the front forks, the manual is a little vague. I?d really appreciate any good advice. I?m mechanically inclined by have never dissembled motorcycle front forks...

anyone ever come across a step-by-step installation guide for progressive springs? would love to see it mapped out in better detail than the factory manual.