unit

I am planning to convert my '92 to LED turn signals and noticed the flasher unit is a rectangular unit with maybe 5 wires. I've converted a 650 Honda and 650 Kawasaki in the past and they used the common automotive style round 3 wire flasher unit. I was able to buy an LED flasher unit for those...

Hey everyone--- My fuel sending unit wire is not attached anymore plus it deteriorated due to the gas sitting in my tank for many years without moving. Two questions---can this be fixed you think? If not, does anyone know if other Yamaha bikes have the same fuel sending unit? I have been...

I've blown the unit, moisture inside it. Bur when I removed it it is the yellow sticker 85-89 Now I'm confused as the bike is a 1998 so it should be the newer icu in. It looks like it's a spare. My question is should the old Cdi run in a 1998 bike but make it run a bit rough? Or is my...

Ok...so the Ignitech is not working. Went to Johns yesterday and after warming up a max we swapped out the stock cdi for my igni...no spark. Stock back in....fired straight back up. I've emailed Garry to ask if he still has a contact at Ignitech...going to call them today regardless...see uf...

I recently upgraded my Roadstar to a Series type regulator. I had a MOSFET unit ready to go in, but decided to buy a Series unit for a great price. This left me with an extra regulator, and seeing that these things are pretty reliable, I don't have any reason to keep it. I tested it in my '85...

Hi, I'm having some issue with my sending unit. Tested the gauge by grounding it to the copper base of the sensor and it maxed out. So i know It's the sensor. Can anyone recommend a replacement unit or maybe tell me what the threads are called? Cheers!

anyone know of atemp sending unit other than the factory unit??:ummm::ummm:

In the seemingly never ending search for my randomly lost cylinder the only place left to look was the ignition module. Thankfully I'm pretty sure I found the problem. As you can see in the pictures, there were corroded components beyond reconditioning. I lightly scraped the worst one with a...

Hi guys, I got a problem with my vboost control unit. It is not working properly. When turning the ignition key it wil not make the servo Motor work. So nu buzzing. When i press on the vboost unit it works every time. I guess it is broken, the circuit board. Any of u have any...

resolved So I just got my bike running I was using a little mower tank to fuel the bike while I cleaned the actual tank and it looked good on the inside after I cleaned it, but after I hooked everything up, go and try to fire the bike and it just cranked but didn't fire I know the fuel pump...

Hi Guys- noo-b here and looking for some help. I have a 96 where the previous owner had installed a Koso gauge set which included a digital temp sensor. Long story but the tach (the whole reason you change this) never worked correctly, jumped all over the place so I decided to put everything...

Hi Everybody, I can't believe that I purchased my latest Max 6 months ago and only just realized that it has a "pass" switch/button next to the high beam switch. sure none of my others have had this but can't find anything out about it??? It seems like a European thing maybe. It simply flashes...

Anyone have a problem w/ this? I just bought a '94 w/ 16k mi...@ 1st the tach was sticking....then on my ride home I noticed the temp needle never moved...maybe it's the electrical connections..will do an ohm test as per clymer book.

I would appreciate any help on this. My ignitor unit is bad and I need to replace it. Yamaha charges $826 for it and I just can't swing that. I tried looking into rebuilt and used but I am not sure just which part #'s are all compatible with my 92 vmax. My part # for it is 3JP-82305-13-00...

Hi There, looking at replacing the R/R unit on my 85 max as i don't think it has ever been changed and eats the batteries even with an optimate going. Is there a certain spec i need to be looking for?:biglaugh:

I am wondering about replacing the flasher relay under the left pod with a led flasher unit like these http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&category=CAR&Page2Disp=%2Fflashers.htm I know I will lose the auto cancel feature but it will mean that I dont need the...

Can the low fuel level sender thermistor assy. be removed fairly easily without removing a bunch of crap? Mine took a dump and I need to replace it. Thanx, Bud

I own a 1994 V-Max and my brother owns a 1992 V-Max. Both bikes have slight oily residues on the bottom of the final drive assemblies, which gets ever so lightly spattered onto the rear wheels while riding. It's barely noticeable. The oil levels are correct and I've see no signs of the oil...

This info is intended for people who have at least a basic knowledge of electronics or can understand a schematic to create a circuit. If you build this, I take no responcibility if after fitting, it fails and frys your wiring. It is for this reason that I'm not offering to make them myself...

I saw on Vmax Outlaw he sells a temp unit that allows the fans to come on 20 degrees sooner. I searched and didn't see any DIY on a switch setup. Would you all recommend the switch vs the kit from outloaw? Thanks, Sid