worth

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. rick67ca

    Have you guys seen this one? Not mine. Worth a look!

    https://phoenix.craigslist.org/cph/mcy/d/1985-mad-max-blown/6267961339.html
  2. Fire-medic

    Ft Worth TX VMax $2800 OBO

    Not mine, no one I know. $2800 OBO, looks like as it has 'running issues' since he mentioned "needs TLC," which to me means, 'it doesn't idle' or 'has trouble starting, and then won't pull cleanly.' Ask the questions if you're interested. Has a Kerker 4/2 exhaust, OEM sissy bar, and '6-pack'...
  3. F

    93 VMAX in Fort Worth for sale

    It's got a corbin seat and the passenger backrest, the lower crashbars and I have the winter and summer windshields all from Yamaha. It's got just over 44K miles on it. Runs good, the idle jets need a little cleaning. I just replaced the front fork seals. I replaced the lead acid battery with a...
  4. F

    1993 VMAX in Fort Worth TX

    It's got a corbin seat and the passenger backrest, the lower crashbars and I have the winter and summer windshields all from Yamaha. It's got just over 44K miles on it. Runs good, the idle jets need a little cleaning. I just replaced the front fork seals. I replaced the lead acid battery...
  5. Bill Seward

    For what it's worth..

    A week ago, the locking gas cap on the Roadstar fell apart. Most of the pieces wound up in the tank. Fortunately, the tank was near empty, so I didn't get a gas bath.. I figured I must have lost some of the parts, as the actual chrome part of the cap flipped off into my lap. So, I ordered a...
  6. P

    What's a Corbin with backrest worth?

    Been thinking about going back to stock and trying to sell my Corbin, but it doesn't seem like nice Corbins are worth much more then a stock seat. Just keep the Corbin?
  7. Foxviewnet

    Is this worth looking at?

    Found a bike on CL and looks like a fixer upper. Asking $3400. Is it worth it if its all cosmetics? Speedo, turn signal, and cowl replacement. Owner says he dropped it and just wants to sell it. Prob just doesn't have the scratch to fix it and needs the money. Says its runs good. May go look at...
  8. Q

    Any Riders in Fort Worth Texas?

    Hello all, I'm in Burleson Texas, which is just 15 min south of Fort Worth. I keep seeing a guy in the area on a Gen I vmax, but I am always going the other way on the highway. I wonder if he is a member? Anyone know who he is? :confused2: Thanks.
  9. poppop

    Trump Worth the benfit of the doubt

    https://www.youtube.com/watch?v=s_cHRdW4Y1k
  10. P

    What is it worth?

    Hello all, I have decided to sell my bike, but am not sure how much it is worth. I am thinking about asking for $2500. It is an '85 with 26,000 miles, and is stock, well I have the stock parts that I can put back on (brakes, SS lines, rotors, etc.). Is $2500 a good asking price, or should I...
  11. S

    Is it worth putting forks from a 96 onto an 88?

    I just bought an 88 Vmax without progressive springs. The bike came with a set of forks from a 96 that are thicker (I guess?). Do I need to bother switching to the 96 forks if I put progressive springs in the original forks? :ummm:
  12. B

    the 2003 Vmax - Comfortable for long rides? Worth $4500?

    Hi everyone! Just joined this forum. In 18 hours I'm supposed to go buy a 2003 Vmax but I don't know much about them! I have some questions I hope you can shed light on? 1. What year did "Gen 2" start? (I'm assuming a 2003 is NOT a Gen2) 2. I read that the Vmax is not comfortable for long...
  13. a113ycat

    An Auction worth being at

    Take a look at this! It is a collectors dream! there are so many bikes that I would personally love to have in my collection that it makes my head spin http://www.auctionzip.com/cgi-bin/photopanel.cgi?listingid=2329491&category=0&zip=&kwd=
  14. J

    Cheap regulators on ebay worth it?

    As ussual funds are short but been having charging issue with my Vmax. I'm redoing all the power and ground wires today with 4 gauge. I don't know if the regulator is bad but for $17 I figured it maybe worth changing. But I see the prices range from $17 to over $100. Will I be wasting money or...
  15. W

    40mm to 43mm fork swap - worth it?

    I have an 88 max with the 40mm forks that need new seals / possibly bushings. Is it worth upgrading to the 43mm forks & triple tree (supposing I can find some for a decent deal.) Is the 43mm fork a big upgrade? Thanks, Brad
  16. Conman

    Stock Exhaust.... What's it Worth?

    Right now I'm sitting on a like-new exhaust ( muffler... headers... everything) from an '06. What's the going price on these? If it's not much I'll install it, but if they're worth something I'll keep my current setup and sell it off. As I understand it they're not in high demand since people...
  17. T

    New member from Fort Worth ..

    Where are all these bikes? Everyone I've ever known who owned one said it's too powerful.. I've seen probably 2 in 15 years. Anyways, looking for other enthusiast in the area. John
  18. P

    What's this worth?

    http://kansascity.craigslist.org/mcy/4520461428.html
  19. rebeltaz83

    Worth selling oem vmax parts

    i bought a 97 vmax, and the po gave me all the oem parts he took off..... is it worth selling that stuff?? or would it be good to keep them so if i ever decide to sell it, i have that stuff to go with it? i have stock black mufflers stock windshield stock seat foam, no cover stock grab bar
  20. T

    Any REputable VMAX Carb experts in the Dallas/FT Worth area?

    Hi, I just purchased a 99 Stage7 Vmax a few weeks ago, it seems to be running quite rich, I'm going to take a stab at messing with the Carbs myself but as a backup does anyone know of any shop or individual that can do carb work...for a fee of course any tidbits would be appreciated
Back
Top