Air/Fuel Screw Settings

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Kratos

Well-Known Member
Joined
Nov 5, 2008
Messages
176
Reaction score
0
Location
Southern Indiana
Finally have the bike running very well. Now that everything else seems to be OK, I have noticed that if I ride the bike to work, and come out to go to lunch 4 hours or so later, it won't idle unless I choke it. I have the A/F screws 3 turns out, and this seems to fix the problem, but that seems like it would be too rich with only slip-ons, K&N filter, plugs and wires. If they are set to 2.5 or less, it will idle fine after it is choked for a few seconds, but will die if it is not choked to start with. Just seems like I should not have to have them set so rich and that the bike should idle without choking it on a day in the upper 70's or lower 80's after only sitting for a few hours.
 
i wouldn't say its that out of the normal. both of my max's did that with slip ons.
 
Back
Top