Back from a long hiatus and needing ignitech help!

[jason martin]

Hey all

I have had my 06 since new and just put a Ignitech CDI on it from Morleys muscle. The issue im having now is the vboost is not working with the new CDI, but works as normal with the stock vboost controller. does anyone have a link to a download for the Ignitech. I have downloaded the software and the manual from Ignitech.

thanks for the help
Jason

 

[Fire-medic]

Sean should be able to give you what you need for that.

 

[Traumahawk]

The map that you are using, did you get it off of the website, or from Sean? The maps are slightly different between the 2. Do you know what version your using? I'm assuming v96? I suspect that you don't have the servo enabled. I downloaded the v96 version and put in a map and took some pics.

Eric

 

[one2dmax]

Might be worth downloading a newer Map. Eric is the expert with these!

 

[jason martin]

The map im currently using is the one Sean sent with the bike. Holy hell it runs smooth, but im new to the software and just need to get the servo turned on. So if I plug the pc into the bike will it automaticly connect with the CDI box? Also Sean are the files that say new for the 1700, sorry man im just cautious old age and treachery have taught me to be careful.

 

[maleko89]

Yes, plug laptop into the unit and turn the key on. The software will then go green and say connected. There are 3 placees to review for vboost. Sensor tab, servo tab, and then you can test vboost functions in the test tab.

 

[one2dmax]

in the drop box the "new" means 90-07 while the "old" means 85-89