Blank center console spot

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

byto1393

New Member
Joined
Jun 7, 2018
Messages
2
Reaction score
0
Location
Marshfield, WI
Has anybody on here figured out what to do with the blank spot on the center console? It bugs me, and I'd like to put something cool or useful there. Thanks
1959d54983a29c6640746fceb2e134ff.jpg


Sent from my SM-G955U using Tapatalk
 
A member recently converted the blank port to a indicator for when his manually switched fan is running,
Here's what Likembikem noted: "I used the '6th dummy indicator' I installed a lens and have that for my manual fan switch on indicator."
 
I do have some blue colored lenses that can be installed but it's not an easy task. I don't know what Yamaha's intent ever was?
 
I do have some blue colored lenses that can be installed but it's not an easy task. I don't know what Yamaha's intent ever was?

Probably to make things symmetrical?

Not that it would be useful, but as a vanity display, you could rig-up a microswitch to illuminate when the butterflies opened past the point where the VBoost came-on. It could be labelled as the "Hang-On Tight" light. Like the Beach Boys song. "Faster, faster!"
 
Probably to make things symmetrical?

Not that it would be useful, but as a vanity display, you could rig-up a microswitch to illuminate when the butterflies opened past the point where the VBoost came-on. It could be labelled as the "Hang-On Tight" light. Like the Beach Boys song. "Faster, faster!"

I like that idea! I could name it "HTFO" which also is what my license plate says.
IMG_1722.jpg
 
We did this one a very long time ago
 

Attachments

  • Gear Indicator Installed.jpg
    Gear Indicator Installed.jpg
    27.1 KB
A monitor to come on when the charging system tanks would be useful to me. That way I could get off the road on battery instead of getting stuck in a dangerous place like the passing lane.
 
I have sold some kits in the past. Though the indicator was different. See pics. Cost is going to be $125 if I have enough of the sending units on hand. Would be the sending unit, mid gear gasket, indicator, connector, and pins (so you can extend the wiring).

The bracket holding the indicator was made by the customer and not something I provide currently.
 

Attachments

  • 22310588_1890612440954642_2206438669684956353_n.jpg
    22310588_1890612440954642_2206438669684956353_n.jpg
    51.1 KB
  • 22549807_1890612650954621_6256497360744156062_n.jpg
    22549807_1890612650954621_6256497360744156062_n.jpg
    64.4 KB
  • IMG_20160509_165936615.jpg
    IMG_20160509_165936615.jpg
    32.5 KB
  • IMG_20160509_165949242.jpg
    IMG_20160509_165949242.jpg
    36.2 KB
  • Screenshot_1.jpg
    Screenshot_1.jpg
    35.4 KB
  • Screenshot_2.jpg
    Screenshot_2.jpg
    27.2 KB
That indicator will work just fine. You need the right switch to ground out when you are in the selected gear. The switches are what's normally hard to come by from the gen 2 ventures
 
There we go! Thanks Sean for your research/knowledge on that detail keeping anyone considering this mod from wasting time on a cheap shortcut.
 
Back
Top