Blowing fuses

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

davidon

Well-Known Member
Joined
Apr 6, 2006
Messages
1,576
Reaction score
6
Location
Gaithersburg, MD
Went to start up but I'm blowing the ignition fuse. Is it safe to assume the other circuits are OK (signals, headlight). These work with no problem.
 
Does it happen right away when key is turned? Ignition fuse is upline from ignition coils, engine stop switch, vboost, ignitor, pressure sensor, fuel pump relay. Lights are separate fuses.
 
Start unplugging ignition components. Turn key on when engine stop switch is in OFF position. Unplug coils, etc.
 
I'm doing the leakage test and it still shows I'm losing current due to a short..unplugged ignitor, coils, fuel pump relay, ignition switch,etc..still have leak. Where is engine stop switch disconnect located..is it in the front? Just about everything in front is disconnected..now when i disconnect R/R problem goes away
 
Engine stop is the red switch on right handlebar.
 
Back
Top