Bolt Needed

[Django]

Can anyone tell me what the part number is for this bolt on the front fender 2002 Max or were I can find one.
Thanks in advance,
Ted B

 

[wildweasel_pt]

I'd say bolts. You are missing 2. Thats pretty easy to come by. Ask the "breakers" here. Kyle should have a handful of them i think.

 

[deekjx]

Yamaha Parts House shows the part number as 95024-08016-00. Its item 10 under the steering section.

 

[Django]

Yamaha Parts House shows the part number as 95024-08016-00. Its item 10 under the steering section.

Thanks!
Got them ordered.
Ted B

 

[RaWarrior]

I seem to remember that the bolt size is (MX-X.XX) is somehow encoded into Yamaha part #'s. Or at least that was true for their snowmobiles.

I'd just pull one, take it to a hardware store, and match it up with one in the metric bin. Or replace all four to keep them uniform. I hate paying $3/bolt or something at dealers when I can get one for a dime at Tractor Supply.

 

[CaptainKyle]

I'd say bolts. You are missing 2. Thats pretty easy to come by. Ask the "breakers" here. Kyle should have a handful of them i think.

You guessed it i have a few.

 

[wildweasel_pt]

Those should be M8. I don't know if the thread is standard. yamaha has the tendency to make bolts with fine metric thread to avoid people going to hardware stores

 

[gamorg02]

I seem to remember that the bolt size is (MX-X.XX) is somehow encoded into Yamaha part #'s. Or at least that was true for their snowmobiles.

I'd just pull one, take it to a hardware store, and match it up with one in the metric bin. Or replace all four to keep them uniform. I hate paying $3/bolt or something at dealers when I can get one for a dime at Tractor Supply.

Thats exactly it:

Yamaha Parts House shows the part number as 95024-08016-00. Its item 10 under the steering section.

08mm thread, 16mm long.

 

[ninjaneer]

interesting. but i guess you can't get the pitch out of the part number? 1.00 vs 1.25?

 

[gamorg02]

almost every bolt follows standard pitch's. don't quote me but i believe thats:

4x .7
5 x .8
6 x 1
8 x 1.25

 

[ninjaneer]

almost every bolt follows standard pitch's. don't quote me but i believe thats:

4x .7
5 x .8
6 x 1
8 x 1.25

ahhhh. cool. oh sorry for quoting you :rofl_200:

 

[gamorg02]

hah no prob. i forget what the 10mm pitch is and i think that changes between 1.25 vs 1.5 depending on the bolt, once again not sure. but for your average bolts across the bike thats almost always true. so u can look it up then go down to ace and pick it up for 10% the price

 

[wildweasel_pt]

The standard thread on M10 is 1.5mm but the caliper bolts and footrests bolts are M10x1.25 so fine thread in this case. All the engine covers bolts are standard M6.