Bradenton

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I have a tooth coming out Thursday. Dentist warned me to take it very easy after..:sad2::sad2::sad2:
 
Well it was another great night Captain Bob was running consistant 9.9 on his Gen 2 Ron came out on his Gen 2 he had never been down the track I believe his best time was 10.8. My Buddy Lyle tool his GSXR 750 he had never raced either I believe his best time was 11.40 I was knocking on the 10 second door but it would not let me in. Here is my runs 1.75 60 ft 7.07 1/8th @ 100.20 11.12 1/4 @ 119.31 next was 1.75 60ft 7.06 1/8 th @ 100.35 1/4 11.14 @ 115.80 next 60 ft 1.75 7.12 1/8th @ 100.17 11.19 1/4 @ 119.07 last one 1.74 60 ft 7.05 1/8th @ 100.30 11.12 1/4 @ 119.18
 
Some nice runs Kyle. Got to get the 60' into the 1.60's and then I think you'll be there!
 
Awesome runs again Kyle.... I don't have any worries about going over 120 in the quarter myself... Not unless SkullDuggery's one hell of a lot more motor than your 89...:ummm: I'd be happy knocking at the 12's:rofl_200:

BTW: Tooth came out, feel somewhat like I've been hit in the face with a Baseball or Bat... But, all's well I guess...
 
I have a tooth coming out Thursday. Dentist warned me to take it very easy after..:sad2::sad2::sad2:

:th_laugh2:
I had surgery back on Oct. 7th to remove my gall bladder, repair the hole in my liver made by the gall bladder and repair a huge hernia. The hernia was so large the doctor had to put a plate in my gut. The plate is 27cm tall by 15 cm wide. Now I can bend in the middle but I am limited to how far I can bend over. They opened me just under the breast bone to the belly button to get inside me to work. So needless to say I was a little messed up. The day the Dr. pull the drains and staples out of my gut. I took my Honda for a 75 mile ride. The wife and me :argue 1: about if I was able to go but I did it anyway, I missed my bike. I was warned to take it easy too :ummm: I thought I did :rofl_200: Now I know it was not a day at the track but never the less.
 
Darn, Seems I always have an excuse... :sad2:

I'll be over towards Lakeland. I have 2 AR's Systems that I'll be testing. One in 22 and one in 45 acp...
Got to try the 22 on a Slide Fire Stock to make it run Full Auto... I'm using a lot of plastic and lightweight
parts to get more recoil force...
 
Have a good night Thursday. Hope you both have Great Runs....


"Dave,
CMMG forgot the full auto parts? No worries. It looks like you will be doing the full auto 22 stuff. I have alot of stuff to test. Till tomorrow
Ron Williams (RMW Extreme)."
 
Kyle, I am guessing the front-end staying-down was the 'good run' & the wheelie was the 'bad run?'

You're almost into the 10's 'Pee-Wee!'

I think you mentioned it before, but what do you launch at? And I assume you are rolling out of the throttle to shift, and aren't using an air shifter? It sounds like you used 5th in the wheelie run? Just going easy at the end because you figured the run was blown because of the wheelie, & not being able to stay on the gas?
 
SO close to the 10s Kyle - good going! Looks like staying down at the start is the main problem, you have power available but just can't quite put it down.. Defo a 10s bike this one :)
 
Kyle, I am guessing the front-end staying-down was the 'good run' & the wheelie was the 'bad run?'

You're almost into the 10's 'Pee-Wee!'

I think you mentioned it before, but what do you launch at? And I assume you are rolling out of the throttle to shift, and aren't using an air shifter? It sounds like you used 5th in the wheelie run? Just going easy at the end because you figured the run was blown because of the wheelie, & not being able to stay on the gas?
I usually launch right around 6000 & yes the wheelie run was the bad one & that blew it . No air shifter just rolling off a little. I might get an air shifter soon though. I would be well into the 10's if I was Pee Wee's weight. I think I have about 60 lbs on him.
 
Back
Top