Brake Upgrades

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

one2dmax

Well-Known Member
Joined
Apr 6, 2006
Messages
17,124
Reaction score
1,684
Location
Derby Kansas
We are proud to announce some new adapters are coming soon. Of course we have our ever popular Hayabusa upgrades for the early Vmax's (85-92) and some other adapters. Now we will be able to offer the absolute best possible braking for ALL year models.

The new adapters (listed below) were tested for over a year and in our opinion work well enough to allow the use of a single caliper and rotor. This gives similar braking power to the stock dual rotor setup that came on the 93-07 (and better then 85-92's). The side benefit is you are able to reduce reciprocating mass by the elimination of one rotor! Also, you can use a single brake line so cheaper braided line setup.

Here's our braking improvement line up.

Lines:
Galfer 2 or 3 line system fronts, rears, and clutch
Goodrich Lines and Midwest_MC Lines

Rotors/Pads:
Galfer/EBC Rotors and Pads as well as a knock off Galfer/China brand.

Calipers:
Nissin, Tokico, Sumitomo, Performance Machine, Brembo and More
93-07 Sumitomo Bolt on for 93-07 Vmax

Adapters:
85-92 4 piston Early GSXR Nissin/Tokico with stock 280mm rotors
85-92 6 piston Hayabusa Tokico with 298mm rotors *Very popular conversion
**new 85-92 6 piston Hayabusa Tokico with 320mm rotors
**new 93-07 6 piston Hayabusa Tokico with 320mm rotors

*** Note, these same adapters allow for combinations on other Yamaha bikes to get better braking. If you have a model you aren't sure about ask us and we can send out samples for fitment testing.

As always it's easier to email me directly at [email protected] for more info (that you don't find in this thread lol).

Sean
 
Back
Top