Carr Wheels, Engines, High End Suspension

[one2dmax]

Carr Wheels, Engines, Seats, High End Suspension

Email me at [email protected]
Call/Text 316-619-8411

$2500 - Green Carr wheels. The only green set ever made for the Vmax. They can be recolored, chromed, or coated if so desired. Includes the Shinko Verge tires (which are in great condition), 298mm wave rotors (all three), offset brake bracket for the rear (for the larger rear rotor). 200 rear tire will clear the swingarm though we also have nothed/braced arms available.

$2700 - Last New Set! Black Wheels with New Tires (though a few years old now). Shinko Verge Front, Stealth 180 Rear. Does NOT include the Galfer Rotors though they are available. Removed and ready. Add $500 to include the new Galfer front wave rotors and solid wave rear ($275 normal each on the fronts and $175 normal for the rear). ***Note, the picture still shows the wave rear (which is larger and will be swapped out OR add $100 to keep it AND include an offset bracket to use that larger rotor).

$2000 - 1985 w/90-100k miles. This actually is a very solid performing engine and is being removed from the green bike that was crashed earlier this year (maybe 1-2k miles since project build). It broke a motor mount location off the block but we'll get that welded back on without any issues. The paint is not likely what you're looking for so we can have it blasted and painted your desired color for $600 more. This engine has a fresh undercut AND overdrive transmission in it. Along with our HD oiling kit, updated shift segment, good clutch (I think stock), adjusted valves, new gaskets/seals, and solid motor mounts.

$2500 -The best chassis parts you can get! 2002-2003 R1 Fork cores. Disassembled, Polished, Black Anodized. Then all parts sent to Penske Racing where they installed Cartridge Kits and custom springs for use on the Vmax. Cycle One Off triples with 2" extensions also polished and Black Anodized. New Bearings. Axle Kit to use Vmax wheel is available for additional cost if desired (no wheel is included).

$1500 - Penske Rear Shocks. Only the 2nd set we ever had made. Some of the best you can get period. No road time yet (still new). Removing from project build. Regular price was $2k. Removed and ready. Does have a rub spot which is on the inboard side when mounted. Will ship these anywhere for free.

$1000 - Good condition UFO Megaphone 4-2 Full Header.

$2500 - 1985 Engine. Built for a previous customer (maybe 3k-5k miles since engine freshen). HD oiling, New Gaskets/Seals, Valve Adjustment, Undercut Trans (standard gearing), Blasted and Painted (black with silver accents). This is a great running, great looking engine.

$3000 - 1300 Hybrid Engine w/Fresh build. 1300 Royal Star Block and Star Chromed Side Covers, Venture 1300 Pistons (same compression ratio as the Vmax), Vmax Trans, Vmax Heads/Cams. About 10% more power then stock. Custom Silver Paint which looks pretty good. This is a very unique engine for sure and you don't see this combination very often (first one we've had in here like this). ***NOTE - We did not build this engine but it looks very well done and I will give it the normal Morleys Warranty!

$250 Koso RN2+ with sensors (two different speed sensors). Includes prewired gauge cluster (90-07)

$500 Shipped anywhere! Possibly the nicest OEM original carbon look body set left on the planet. Very nice condition but I hesitate to call it "perfect". You can see just how glossy this still is. Most of these sets tend to fade with sun exposure.

$250 plus shipping (outright). Later model Corbin Seat. Overall decent condition but a couple of wear spots (you should be able to see them in the picture - email me for larger pic if desired)
$150 Exchanged - Front Morley's Muscle Seat. Tall Cut - Gen 2 Pattern.
$275 Exchanged - Full Muscle Seat Set (new). Mid Cut Front, Stock Shape Rear.
$150 - Exchanged - Front UFO Seats (Recovered Flips available for $50 more). All Smooth Black.
$350 - Exchanged - Last remaining New Old Stock UFO Seat set. All smooth black and max lowering done.

 

[Eugene Brad]

Tax refunds are around the corner.

Sent from my SM-G360V using Tapatalk

 

[KDIMD]

You've got me interested in the front end. I also have a 2008 HD dyna. It has same 29 degree rake and trail, but heavier by 80 pounds. Curious if the trees will mount up. But the dyna already has 49 mm forks with upgraded springs, intiminators and RSD adjustors.

 

[one2dmax]

Updated with another part (the rear diff) and some additional pics of the wheels and rear shocks.

 

[one2dmax]

I know the Harley can be fitted to the Vmax with some bushings and spacers but I don't know if these can go the other way? I would think where there's a will there's a way lol. But the triples are setup specifically for the Vmax? I do have another front end that will be available soon that uses the R1 forks with a custom rake and Vrod headlight. Still setup for stem for the Vmax so again I am not sure what will fit for you? Price would be a lot cheaper!

 

[one2dmax]

Added more stuff and marked one item sold

 

[KDIMD]

I'd be interested in the r1 setup for the vmax once you have more details.

 

[one2dmax]

Which one? I have the two different ones I pictured (the ones with the Penske kits and the one with the raked triples and Vrod headlight). I also have a few sets on hand still for 50/54mm or 50/55mm tubes (R1 or Busa). They run $500 for R1 and $550 for busa.

 

[KDIMD]

Will send email.

 

[one2dmax]

Added more stuff!