bumper
Well-Known Member
This is still in the beta testing stage, but so far it's working. I was getting oil in the air box after running high rpm. This in turn srewed up the paj1 and air corrector. So I came up with this. A 6 1\2 piece of 1 1\4 PVC pipe capped with three barrbed 1\4 connectors. I drilled the so called drain at the front of the air box so the line would go through. I then ran the line along the frame to the battery box and then down with a small engine fuel shut off in line.
Inside the box I pulled the tubes that is between the carbs and capped one end and hooked the other to my bottle. Also drilled a small vent hole topside on the tube.
Inside the box I pulled the tubes that is between the carbs and capped one end and hooked the other to my bottle. Also drilled a small vent hole topside on the tube.