Double Banjo Bolt question

[mike7488]

To those of you that are running the two line SS front brake lines....what was your install order at the master cylinder? Did you put a copper washer between the fittings? Or did you just use two outer washers and none between the 2 fittings?

-Mike

 

[gamorg02]

To those of you that are running the two line SS front brake lines....what was your install order at the master cylinder? Did you put a copper washer between the fittings? Or did you just use two outer washers and none between the 2 fittings?

-Mike

copper washer between everything. master cylinder, copper washer, banjo fitting, copper washer, banjo fitting, copper washer, bolt.

 

[Redbone]

copper washer between everything. master cylinder, copper washer, banjo fitting, copper washer, banjo fitting, copper washer, bolt.

+1, each one of those connections need to be sealed

 

[gamorg02]

sealant and i think a spacer for the middle one between the two connections.

 

[4gasem]

Correct! All surfaces MUST have the washers.

 

[naughtyG]

+1 I use that - longer bolt, 3 washers. One either side, one sandwiched in the middle.

 

[godsend1]

I'm not sure if anybody has mentioned it yet, but, you need washers between all 3.