Yes, I first made my own with some modification, reversed the stock pegs. Left to right/ right to left and moved them up to location shown.
I am now running the set shown in the link you posted, but not the scalloped set.
I had to relocate the pivot points to get the control rod down under the clutch basket cover,right side and to lower the rod on the left side.
I ordered the wider peg set (same site) and drilled out all of them from the 5/16-18
to 8mm for the shift and brake pegs and to 10 mm for lever to frame mount. See Pics.
Now for the price these are not heavy stand on controls but they do look good IMO.
The first pic is the home made set, second two are the ones in your link, PM for close-ups or info if needed.
