Headlight and turning signal issues

[vette_guy]

Hello, I have a '94 Vmax and for some reason my headlight goes on and off as well as my right front turn signal stays on solid constantly when the bike is running. However when I use the turn signal it blinks along with the other three signals like it should but then goes back to a solid light when I turn it off. Any suggestions what's going on here. Thanks!!

 

[Jan Bee]

Hello, I have a '94 Vmax and for some reason my headlight goes on and off as well as my right front turn signal stays on solid constantly when the bike is running. However when I use the turn signal it blinks along with the other three signals like it should but then goes back to a solid light when I turn it off. Any suggestions what's going on here. Thanks!!

Are you plugged into the double blue wire in the headlight to keep the blinkers as running lights?
If so you can plug into the other double connector inside the headlight also as it sound as though you have a hot wire grounded.

 

[vette_guy]

I'll take a look and see. Thanks for the input.

 

[Jan Bee]

I'll take a look and see. Thanks for the input.

You can remove the 2 phillips screws at 5 and 7 o'clock and pull on the bottom of the headlight to remove it.

 

[vette_guy]

Sounds like a fun weekend project for me to do this weekend. Thanks again for the the advice