Intake / Air Box Hose Question

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

m-cman

Alien Abductee
Joined
May 29, 2007
Messages
2,457
Reaction score
6
Location
Texas
On the stock airbox there appears to be two hose nipples on the bottom. The rear is larger than the front and the front has a small round foam filter inside where the air filter plugs into. On my bike the rear has a hose that attaches but the front did not. Am I missing a hose or is there no hose attached there? I looked in the shop manual and the parts book but couldn't find one. Also, what is the purpose of the two openings? :Confused:

Thanks for any assistance....
 
Rear is for crankcase ventilation. Front is a drain in case water gets in there. No hose goes to the front nipple.

Mark
#1098
 
Thank you very much. Couldn't figure out what happened to mine.... Now I know. NOTHING :- )
 
That is the hose that is a real bitch to get back on after removing the factory airbox.PITA!
 
Trick is to move the coolant resevoir out of the way. Then, pretty easy.

Mark
#1098
 
Those funky looking 90 degree needle nose can help also once you move the overflow bottle out of the way.
Rusty
 

Latest posts

Back
Top