jetting

[djvmax07]

Want to jet my carbs myself is there any were I can get step by step instructions on the site? Do I need to take carbs off the bike?

 

[Traumahawk]

Here is a very good thread that will answer all of your questions.

http://vmaxforum.net/showthread.php?t=3570

 

[veebooster]

Want to jet my carbs myself is there any were I can get step by step instructions on the site? Do I need to take carbs off the bike?

Yes. Do a search of this forum. Coles notes version - take carbs off, flip upside down, remove plug on the bottom of each carb body. You can see the main jet from there carefully loosen it with a proper fitting screw driver then use a round toothpick to completely loosen it, pull it out stuck to the toothpick. Reverse for installing the new jet. If you drop it inside - :bang head:take them completely apart!!

Dale

 

[veebooster]

Traumahawk did all the work for you. :eusa_dance:
He's fast....like a vmax.


Dale

 

[Traumahawk]

Traumahawk did all the work for you. :eusa_dance:
He's fast....like a vmax.


Dale

LOL...I'm at work.....I have nothing else better to do.....

 

[djvmax07]

ok thanks I have 165 mains and 175 maims in kit witch one should i start with?

 

[Traumahawk]

A lot of people have posted their set ups here.....so it should give you a good baseline.

http://vmaxforum.net/showthread.php?t=16981&highlight=jetting

 

[djvmax07]

thanks

 

[one2dmax]

neither. what kit are you using?

 

[djvmax07]

dyno jet stage 7

 

[one2dmax]

Either leave the stock jets or go one/two sizes smaller.