Lifting spools

[Dr.n2o]

Definitely interested in a set

 

[RUSSOM]

New here, first post, and it is to say that I would like a set when you get the details worked out.

Thanks

 

[mvrk10256]

I have some T304 Stock. I am going to make one set that uses the stock nut for the shocks, and one set that uses the axle to experiment. The ones that use the nuts will be small spacers for you to be able to lift with a sportbike lift, but they wont be like sliders.

 

[timscues]

How do we order a narrow set

 

[one2dmax]

Email me with the parts request

 

[Fire-medic]

They won't work to get the tire off if you have a wide rim. The stock rim/tires will come off just fine this way.

Sean

Sean, how-wide is "wide?" I have a Kosman 5.5" X 17" shaft-drive rear. Thanks.

 

[Redbone]

Sean, how-wide is "wide?" I have a Kosman 5.5" X 17" shaft-drive rear. Thanks.

5.5" is too wide to remove without removing the final drive.

 

[gamorg02]

5.5" is too wide to remove without removing the final drive.

the rim itself shoudl be fine as thats what i run. IIRC the difference is the tire and that line is usually 190 vs 180

 

[[email protected]]

the rim itself shoudl be fine as thats what i run. IIRC the difference is the tire and that line is usually 190 vs 180

+1. I can snake my 180 on a 5.5" rim into the swingarm without messing with the final drive.

 

[gamorg02]

+1. I can snake my 180 on a 5.5" rim into the swingarm without messing with the final drive.

yup and my 190 will NOT fit unless i broke the plastic dust covers.

 

[m-cman]

My Kosman 18" with a 170/60 tire was very difficult to install with the drive on. Had to remove the caliper, etc and let the air out of the tire and still was afraid I would break the plastic dust cover.

 

[Fire-medic]

yes, I can remove my 17" x 5.5" kosman w/o removing the pumpkin. I don't have a 190.

 

[hot rod]

I'm interested, let me know if you have pricing. . .

 

[one2dmax]

Anyone wanting a set needs to email me and i'll reserve them for you. They have been officially ordered but will still be some weeks out yet.

Sean

 

[jedi-]

Shorty spools are now ready.
My trusty assistant has been working overtime.

 

[one2dmax]

Great assistant. I think that requires some ice cream bonus pay.

 

[wildweasel_pt]

Hey Steve whats the inner thread? Standard M10? Is that what stock swingarms have?

 

[srk468]

I'm in for a set, I'll email you a bit later Sean... Great looking work Steve!!

Sent from my ADR6425LVW using Tapatalk 2

 

[jedi-]

Hey Steve whats the inner thread? Standard M10? Is that what stock swingarms have?

Metric fine, M10

 

[wildweasel_pt]

Hmm ok... Thought they were standard 1.5 pitch. Seems i can't get a set then. Or can you make a different set with a different thread pitch?