Made some bitz

[jedi-]

Let me ask you this. if they are epoxied to the carb covers how do you have access to the screws to remove the diaphrams for service?

The screws are accessible, just as they were. I removed my own and refitted them after bonding them together.

 

[lankeeyankee]

Very nice, with the brass screens they look better than exactreps..........

Brass :ummm: They are coming across as silver screens to me
Is it my monitor that is off:ummm: Looks the same as Extrep but he mounted his screens near the edge rather than further in Ijust dont like that you have super glue em on I sure would hate to be cruising down the road 80MPH and have the glue break loose they are very expensive to have falling off
Leave the glue to model airplanes

 

[Hercules]

Jedi, you could make a small fortune making the velocity stacks[in different sizes with screens] for the flatsides they are hard to find in aluminum now,Cornel charges $75.00 per stack with no screens.Sudco's main CNC guy is no longer making them.

I want to see the Fork covers on a bike do you have pics yet? Nice work!

 

[KJShover]

Jedi, you could make a small fortune making the velocity stacks[in different sizes with screens] for the flatsides they are hard to find in aluminum now,Cornel charges $75.00 per stack with no screens.Sudco's main CNC guy is no longer making them.

I want to see the Fork covers on a bike do you have pics yet? Nice work!

I agree, I think he'll do quite well in the aftermarket. unk:

 

[jedi-]

Brass :ummm: They are coming across as silver screens to me
Is it my monitor that is off:ummm: Looks the same as Extrep but he mounted his screens near the edge rather than further in Ijust dont like that you have super glue em on I sure would hate to be cruising down the road 80MPH and have the glue break loose they are very expensive to have falling off
Leave the glue to model airplanes

The screens are stainless steel, the retaining ring is bronze.
They won't fall off, it's not super glue, I used a contact adhesive, stuff we use all the time.

Pics coming soon of all the bits on the bike

 

[lankeeyankee]

Jedi, you could make a small fortune making the velocity stacks[in different sizes with screens] for the flatsides they are hard to find in aluminum now,Cornel charges $75.00 per stack with no screens.Sudco's main CNC guy is no longer making them.

I want to see the Fork covers on a bike do you have pics yet? Nice work!

There are a bunch of people making velocity stacks. I spent some time looking for velocity stacks to fit the VMAX over the carb cover..
Here is one of many selling stacks.
http://www.velocity-of-sound.com/velocity_of_sound/picture_gallery.htm

Cornell sells stacks also, he must have gave you a special price of 75.00 a stack

UFO Vmax Chrome & Polish


Polish Only $120.00 per SET. Additional Chroming and polishing... VGAS Velocity Stacks: Chromed $180 set of four. Fork Brace: Chrome $50.00 ...

 

[jedi-]

Here's a few pics as promised. The front is only mocked up as I need to change the seals , springs etc. After the front end is done I'll start working on my wider wheel project.

 

[Hercules]

There are a bunch of people making velocity stacks. I spent some time looking for velocity stacks to fit the VMAX over the carb cover..
Here is one of many selling stacks.
http://www.velocity-of-sound.com/velocity_of_sound/picture_gallery.htm

Cornell sells stacks also, he must have gave you a special price of 75.00 a stack

UFO Vmax Chrome & Polish


Polish Only $120.00 per SET. Additional Chroming and polishing... VGAS Velocity Stacks: Chromed $180 set of four. Fork Brace: Chrome $50.00 ...

look! http://www.ufocycles.com/UFOProducts.php?cat=4.
UFO VGAS Replacement Vgas Velocity Stacks
$75.00 each

 

[lankeeyankee]

look! http://www.ufocycles.com/UFOProducts.php?cat=4.
UFO VGAS Replacement Vgas Velocity Stacks




$75.00 each

Yupp I see it now. How about that 2 different prices can you figure it out?

 

[Hercules]

Yeah He's a moron,if you call about the chrome ones he'll send you a chrome fork brace for $180.

Jedi I'm digging those fork covers hey look awesome. I need a set in chrome please!

 

[jedi-]

Made some grips and internal throttle.

 

[82ndCowboy]

Made some grips and internal throttle.

Would that internal throttle work for adapting to 1" grips? Or can you make something that will allow me to use 1" grips on the 7/8" bars?

 

[Hercules]

Made some grips and internal throttle.

Pretty cool[not exactly sure how they work] but cool looking

 

[jedi-]

Made some solid engine mounts and homemade exhaust bits and mods:eusa_dance:

 

[gunrunner]

I'm defintely interested in purchasing the carb diaghram covers and fork sleeves. Are the sleeves for the 94-07 fork diameter or the 85-93? Also, how do the carb covers attach?
Thanks!

Me to ..... I told you lots of us would want some of what you got .
You need your own sub-forum so orders can be taken instead of taking over your thread . unk: