Maxflow StreetPro 4-2 Exhaust w/ MegZilla Mufflers

[user 16425]

New in box, I bought it a wile back and ended up not using it as my max needed a ton of work and decided against doing it.
This is one of the first Megzillas made after the transition form UFO to Star Rider Performance. UFO called it the "John Pandure" exhaust I beleive. Anyways it's big, it's bad, it's heavy and probably the coolest looking and sounding exhaust you can get for a gen 1. It's also extremely expensive $1600.
Here's your chance to get one on the cheap. Like I said it's new. I just unpackaged it today to inspect it for damage and craftsmanship before trying to sell it. I repacked everything and kept all the original labels on the parts . It's all there and ready to go! This is a complete exhaust system (I didnt include pictures or all the pieces) ceramic coated inside and out. 2.5" Baffles with a stainless steel wrap for core material and 2.5" end caps.... THAT'S FOUR 2.5" BAFFLES!!!!
For details visit Star Rider Performance
http://starriderperformance.com/max...w-megzilla-mufflers-ceramic-coated-85-07-all/

$900 Free Ship to Cont. US.
This is my first time using the Forum. So bear with me please.

 

[user 16425]

BUY ME!

 

[Fire-medic]

Guessing the centerstand is a take-off w/this design? I have a UFO 4/1 and while it does not require the cutting of centerstand brackets like the Kerker 4/1, you do have to remove it. However, for servicing you can re-install it to lift the bike, but it needs to be removed to ride it. The UFO 4/1 I have uses what appears to be a very similar shape megaphone to what you show for this. I special-ordered it from Jon Cornell, and he delivered it to me, less-than a month before his death.

What are the megaphone dimensions for the small end and big-end, and the o.a. length?

Here's a rear shot, it's two, 2 into 1's.

I went to the Star site, it retains use of the centerstand.
Product Features

• 1.5" OD
• 0.065 Wall Tubing
• Mandrel Bent
• Hand Welded
• Ceramic Coated Inside and Out
• 2.0 or 2.5" Baffle Core
• 3 End Cap Sizes Available
• SS Clamps
• Allows Full Use of Center Stand
• 100% MADE IN USA, NORTON, OHIO

I see a bit of resemblance to the original SOHC Honda 750-4 profile, in the exhaust.

 

[user 16425]

"What are the megaphone dimensions for the small end and big-end, and the o.a. length?"
I will measure the inlet soon. For the big end the baffle core and cap (hole in cap) is 2.5 inches i belive. Do you want over all max diameter of the muffler? I will also post pictures of dimensions measured.

 

[Fire-medic]

"What are the megaphone dimensions for the small end and big-end, and the o.a. length?"
I will measure the inlet soon. For the big end the baffle core and cap (hole in cap) is 2.5 inches i belive. Do you want over all max diameter of the muffler? I will also post pictures of dimensions measured.

I was wondering the megaphone cap width dimension, and the i.d./o.d. of the opposite end, where the connector pipe is, and the o.a. length of the megaphone, end-to-end. Thanks.

 

[user 16425]

I was wondering the megaphone cap width dimension, and the i.d./o.d. of the opposite end, where the connector pipe is, and the o.a. length of the megaphone, end-to-end. Thanks.

I attached photos to the post.
The photo with a measurement of 3.970" is of the caps major diameter. I tried to remove the caps as they are removable, but was unable to get them out without scratching them all up. So I was unable to measure the minor diameter (the end of the cap that slides in and butts up against the mufflers core) but I would estimate that to be about 3.920".

 

[Fire-medic]

I attached photos to the post.
The photo with a measurement of 3.970" is of the caps major diameter. I tried to remove the caps as they are removable, but was unable to get them out without scratching them all up. So I was unable to measure the minor diameter (the end of the cap that slides in and butts up against the mufflers core) but I would estimate that to be about 3.920".

Thank-you for your posting the dimensions.

 

[user 16425]

Rumble!

 

[VMAX Darrell]

Hello,
Is this exhaust system still available?
If so , please send me your phone number so that I can call you to discuss further
Thank you,
Darrell Holyk
1-780-619-1300

 

[user 16425]

Hello,
Is this exhaust system still available?
If so , please send me your phone number so that I can call you to discuss further
Thank you,
Darrell Holyk
1-780-619-1300

Yes it is still available

 

[Eric Graves]

Still?I'm interested

 

[user 16425]

Still?I'm interested

Yes it is! Warning *LOUD EXHAUST*

 

[Eric Graves]

How much plus shipping to 37381

 

[user 16425]

How much plus shipping to 37381

$900 Shipped, please read entire description and review all photos.

 

[user 16425]

Half of the exhaust

 

[user 16425]

SHE'S WIDE OPEN!

 

[PATMAX]

I’ve posted a Quadzilla, never used here and no takers. Looks like its an Ebay item if one wants to sell it.

 

[user 16425]

I'm in no hurry to sell, Its been new in box for three years now, it can spend another three for all I care. Maybe by then I'll have my max fixed up enough to put it on

 

[Samy]

anyone has a video of this exhaust pipe? thank you

 

[user 16425]

I have never been able to find a video for it. UFO and Star Rider never made a video for it. ODD considering the mount of money they ask for it new.