Need a flatrate estimate

[Sauron]

On the number of hours the following job should charge.

R&R rear shocks with Progressives

R&R front springs and install new Progressives with 1" lowering kit and new fork seals

R&R forkbrace with UFO brace

R&R front brake lines with Galfers and bleed front brakes

Install Holeshot aluminum fan and override switch.

Can someone give me a fairly accurate total hours for this work?

Thanks, guys.

 

[KJShover]

If you have a fairly good idea on whats going on, about 3 hours and you really wouldn't be rushing too much. But what the shop's book says is more than likely longer.

 

[gamorg02]

i would say a bit longer than that for the forks, esp if you've never done forks before or even these forks. all depends how easy that damper rod wants to come out.

if you can wrench but are not that familiar with the vmax i'd say:


R&R rear shocks with Progressives -> 45 mins (depending on exhaust)

R&R front springs and install new Progressives with 1" lowering kit and new fork seals (2-3 hours)

R&R forkbrace with UFO brace -> 20 minutes

R&R front brake lines with Galfers and bleed front brakes -> 45 mins - 1 hr

Install Holeshot aluminum fan and override switch. -> 20 min

 

[Sauron]

Awesome, guys: Thank you!