need help ? case cover

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

chillcool68

Well-Known Member
Joined
Mar 12, 2013
Messages
65
Reaction score
18
Location
Ft. Lauderdale
hello all, im not quite sure but i am replacing my case cover gasket stator side and a piece fell out not sure where it goes?????
:confused2: pics attached
20140512_204614_zpse151c6ae.jpg

20140512_204631_zps35c5e72c.jpg

20140512_204631_zps35c5e72c.jpg
a>
 
Last edited:
I want to say it goes behing the pie thingy but fits on with the stator cover installed. Don't quote me on that, though. It's been a while since I took that cover off. I'm sure someone will be along in a bit to provide real help. can you rest the stator cover on there (it should hold with the magnets) and try it out to see which way it fits?
 
See the attached picture (thanks to Dingy)
 

Attachments

  • Stator_cooling_kit.jpg
    Stator_cooling_kit.jpg
    116.7 KB
If it fell out it was misplaced. It should go inside the outer star shaped insert IIRC
 
grrrrrr, well now after everything put together, my charging is only at 11.9 volts when before it was at 14.0 any ideas what might have happened?????
 
Check the plug in connections for the stator to the regulator. Might have also pinched the wiring for the stator too?
 
Yeah found a stator wired pinched and exposed re-spliced and heat shrink hope that works thanks Sean

Sent from my LG-D801 using Tapatalk
 

Latest posts

Back
Top