Need UFO 4-2 advice.

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

paulibiker

Well-Known Member
Joined
May 3, 2006
Messages
318
Reaction score
2
Location
ANKENY, IOWA
Bought a Vmax last week and it has a UFO 4-2 exhaust on it.

It is LOUD! Crazy LOUD! And that's with the smaller ends, can't imagine it with the bigger outlet end caps. Anyway, I need to quiet it down or sell it.

Two questions:

Anyway to tone it down?

How much is it worth, if I go that route?
 
The way to make it quieter is to take it off. Depending on the condition, it could be sold anywhere from $200-$600, I'd say. Maybe a bit more.

Sent from my SM-N900V using Tapatalk
 
Slashcuts? Replace the packing with a ceramic type will lower it a bit but will likely still be louder than what you're looking for. I put a set of speak easy in mine as well. Again lowered it a bit but tough to tune as well. I ended up ditching mine.
Dale
 
Do you have slash cut or their megaphones? You can repack or do anything is you have slash cut. The megaphones have the 1 1/2& a2 1/2 end cap.mas Kyle said you can pack them. Stock they have basically steel wool, I bought a thing of packing for under $20, on Dennis Kirk which would be enough for both pipes..
 
Do you have slash cut or their megaphones? You can repack or do anything is you have slash cut. The megaphones have the 1 1/2& a2 1/2 end cap.mas Kyle said you can pack them. Stock they have basically steel wool, I bought a thing of packing for under $20, on Dennis Kirk which would be enough for both pipes..

Megaphones is what I have.
 
Paul they are loud, I have a 4-1. It's a lot quieter than the slash cut. Get some packing and try re packing them. It's only $20 or so and time if none is available as a local shop. I really like the 4-2 holeshot on the 95 I have. But my 90 with muscle jet kit and the 4-1 will walk away from it fast.


Sent from my iPhone using Tapatalk
 
You can always do what I did and put some Holeshot mufflers on the system. Their inlet fits perfectly and you just need to make a pair of small plates to lower the mounting holes for the muffler straps. Works like a charm and sounds great!
 
You can always do what I did and put some Holeshot mufflers on the system. Their inlet fits perfectly and you just need to make a pair of small plates to lower the mounting holes for the muffler straps. Works like a charm and sounds great!

I put Holeshot cans on my UFO exhaust and it sounds great and isn't nearly as loud. He sells the mounting straps in two sizes I ordered the longer straps and they bolted right on and fit perfect.
 
Back
Top