Plug change question

[20Vmax20]

I am going to swap my spark plugs tomorrow hopefully and my question is for the ones that removed the upper radiator hose to access the front plug. Is there coolant still in this line or does it drain into the radiator when the motor sits? Just would like a heads up if I’ll need a bucket or not.

 

[MaxMidnight]

Yes, there will be coolant in the hoses.
Not sure why you need to remove them though. If the tails of the clamps are in the way then move them round.
If your plug spanner is too wide then use a box spanner instead. If not already done cross drill the top end for a tommy bar.

 

[ShawnD]

I've changed plugs without doing anything with the coolant hoses. You'll need a short & long extension, universal joint & you'll start from the right side of the bike.

 

[Richard Corbett]

Use a large cable tie to pull the hose up out of the way.

 

[20Vmax20]

Thanks for all the replies. Sounds like I can get it done without messing with the hoses. Less is better since I’m working with big hands in small spaces.

 

[Woody]

I used the plug wrench. That comes in the tool kit. No issues