Question about air intake?

[javaman181]

i have a 2001 vmax, love it. I have a tech question?

i notice online that velocity stacks are mounted below fake tank on vmax.
i also see what appears to be velocity stacks mounted on the outside of the
bike where you see the carberator covers. Are they both suppose to be like that?

help

thanks

 

[user 16790]

underneath the cover they should be real stacks, on the outside of the carbs they are just decoration

 

[Fire-medic]

Here's something which will help you to learn about your bike. Note that there are several tech supplements of multiple pages in the front of the file, before the actual factory shop manual. You need to read the tech supplements of the year for your particular VMax model, to ensure that you're using the correct specs.

An example: 1985-1992 have smaller diameter 40mm fork downtubes, and a single schrader valve for air assist. The front calipers are one pair of single-opposed pistons, and 282mm rotors. 1993-2007 front ends are larger-diameter 43mm downtubes, calipers are (each) two pairs of opposed pistons, 298mm brake rotors and the top of each fork downtube has a schrader valve for air-assist pressure. A popular fork mod is Progressive Suspension fork springs, which do-away with using air pressure.

Another example is 1985-'89 electronic ignition boxes are two ignition pick-up coils inside the left side stator/rotor cover. The give-away is the 5-wire connector from the left-front engine side case cover, over the stator/rotor. The 1990-'07 engines use a single pick-up coil inside the left side stator/rotor cover, and it only has two wires at the molded plastic quick-disconnect.

VMX12- Service-Manual.pdf (vmoa.net)

 

[DreamV4]

Velocity stacks is a perfect way to kill engine. No air filter? I repaired about 100 car engines and about 95-98% of them died because of car owner.

 

[javaman181]

underneath the cover they should be real stacks, on the outside of the carbs they are just decoration

i can't see why so many vmax owners put them on the outside.

 

[user 16790]

it's just a look that some people like

 

[MaxMidnight]

Perhaps Mr Javaman181 is referring to those that are part of the air box?

 

[Parminio]

i also see what appears to be velocity stacks mounted on the outside of the
bike where you see the carberator covers. Are they both suppose to be like that?

help

thanks

I think he's talking about these:



Those are just decorative. They're not functional. They're also pretty expensive, so if you bought the bike with those on it, well done.

 

[Fire-medic]

One of mine w/the stacks.

 

[CaptainKyle]

These are the real one's

 

[Parminio]

These are the real one's

Is that the old V-Gas system from UFO?

 

[Parminio]

View attachment 81912

One of mine w/the stacks.

One fellow I met out ridding once had stacks like yours. He had painted the tops of his carb covers black and then installed them. It made them look real because you couldn't see what was back behind the screens. Made them pop too.

 

[CaptainKyle]

Is that the old V-Gas system from UFO?

Yes sir !

 

[PATMAX]

Not to be confused with a Vgas set up !