Question about sync screws

[EAGLEPI]

I've read and printed out the how to to sync my carbs but it's a bit confusing.

On the right side there are 2 screws left and right or front and back and then on the left side there is another screw.

can someone tell me so that I am clear about what each screw does. I assume the right and left sides is as you sit on the bike right?

can someone fill in next to each screw and tell me what it does.

right side

right ( front )

left ( rear)


left side

screw



Also on my Carbtune Pro I assume that the columns going from left to right are 1 2 3 4 correct ?


Nevermind I found the answers to my questions

Thanks

Ron

 

[4gasem]

They are which ever tube you hook them to.

1234 makes it easy though!

Left has one screw for rear carb, the other side has two for front and rear.

I hook #1 hose to the front left then #2 to the rear left and #3 to the right front and #4 to the right rear.

#1 WILL NOT CHANGE! Adjust the others to be the same as it.

Also remember you may have to go back and forth a few times before it's spot on.

Chris