Re installing stock airbox

[Constantinos]

So I got my used airbox with k&n filter (previous owner removed it and installed chinese crappy pods) . The bike is currently running rich. I want to reinstall the stock airbox and was wondering whether there is an easy way to do that. Any suggestions?

 

[Fire-medic]

Some info:
http://www.vmaxforum.net/showthread.php?t=24602&highlight=airbox+installation

http://www.vmaxforum.net/showthread.php?t=21303&highlight=airbox

 

[Traumahawk]

Having the stock air box on it....should make it not run as rich. It should run quite nicely.

 

[Constantinos]

looking at the top of the carbs where the airbox needs to sit, I found the breather hose so check on that although it will be rather hard to install. However I noticed that at the base of each carb there is a rubber hose which leaves the carb and ends up....nowhere. What the heck are those and more importantly where are they supposed to go?

 

[Traumahawk]

These are drain hoses.

Here is a good pic, on which you can see how they are routed on the bike.

Hope this helps.

 

[Constantinos]

These are drain hoses.

Here is a good pic, on which you can see how they are routed on the bike.

Hope this helps.

Thanks man that helps a lot!unk:

 

[gentsvmax]

Those are your carbs float bowl drain tubes, I've gone back to stock air box and all jetting but still run a kerker 4 into 1, my machine runs and sounds GREAT!!!!