Removable rear wheel stand

[Dan Lee]

Has anyone come up with a good idea on a removable rear wheel stand that will work on a Gen 1 Vmax. My bike has a kerker 4-2-1 exhaust, previous owner removed the center stand, since this bike has no place to install bobbins, makes it a little difficult, thinking of using a heavy duty steel rod and goIng through the axle, since it is hollow, maybe fab up a bobbin set up that is removable if rear wheel needs to come off.

 

[one2dmax]

I have spool nuts to replace the lower shock nuts. This works for stock wheel/tire combo's but not the 180-200 wide tire combo's.

 

[Dan Lee]

Thats what I am looking for
Thanks

 

[Dan Lee]

Sean,
I would like to buy a set from you, do you have a link? I looked on the web site, but didn't see them

Thanks

 

[Dan Lee]

Do you use a longer bolt that passes through the shock then the spool? Must Have soon.....

 

[[email protected]]

Do you use a longer bolt that passes through the shock then the spool? Must Have soon.....

Order from Sean via email.
[email protected]

No long bolt required. Those nuts replace the existing nuts on the bottom of the shocks.