What did you do to your Vmax today? Part 2

[Fire-medic]

Nothing exciting built a helicopter out of Vmax parts and a few other oddz and ends for a craft show tomorrow

Reminds me of one of my favorite guitarists, Randy California.



That piece should be an easy sale. Looks like a VMax rod, 1FK.

 

[wayne billings]

painting the engine cases. I just couldn't leave it as is.

 

[Dansmaxresto]

Hey Wayne, can you send some before and after pics, what paint you use and your method?

 

[wayne billings]

Hey Wayne, can you send some before and after pics, what paint you use and your method?

good morning yes I will try to send them through my gmail. not a cumputer savy guy. I have no before pics . It had been rattle canned before I got it. I used duplicolor ceramic engine/GM -Chrysler low gloss #DE 1634 $8.99@ oreillys. 1 can did the block and side covers, also used dupli color hi fill red primer, it makes it easier to see what you might have missed. this black paint is more like flat with a bit of shine.I was thinking it would be satin like. the best in your search and keep the shinny side up

 

[desert_max]

Nothing Yet, but will be giving it a deep clean later this afternoon. I haven’t been riding it, but it still got dirty. How are you ask? Well…

Rats in the shop! I hate f’ing rats.

Went for years never had one out there. Made the mistake of storing some of the scratch grain that I feed the chickens in there. I know there are rats in the barn and didn’t want to leave it out there. (This was Against my better judgment). Sort of forgot about the bag back in a corner and began to notice turds on the benches and unexplained dirt/filth on the motorcycles, knowing that I had put them away clean.

Then I discovered the bag of grain. One small hole in the bottom, but like sand in the hourglass, half the bag spilled out all over the floor. The rats have been having a field day. The filth all over the motorcycles is rat #$%* where they’ve been climbing and crawling all over them. It is a mess.

Of course the grain has now been cleared up, but the rats won’t go away. Now they’re chewing all kinds of stuff. I am going medieval on them. The most barbaric traps known to man are deployed with tasty morsels scattered around them. One down and an unknown number left.

 

[wayne billings]

Hey Wayne, can you send some before and after pics, what paint you use and your method?

 

[CaptainKyle]

Finished up some paint work and tore the 97 mostly apart trying to make some room around here. It is just the motor sitting in the frame now. I will yank it out in the morning hopefully.

 

[MileHayabusa]

Nothing Yet, but will be giving it a deep clean later this afternoon. I haven’t been riding it, but it still got dirty. How are you ask? Well…

Rats in the shop! I hate f’ing rats.

Went for years never had one out there. Made the mistake of storing some of the scratch grain that I feed the chickens in there. I know there are rats in the barn and didn’t want to leave it out there. (This was Against my better judgment). Sort of forgot about the bag back in a corner and began to notice turds on the benches and unexplained dirt/filth on the motorcycles, knowing that I had put them away clean.

Then I discovered the bag of grain. One small hole in the bottom, but like sand in the hourglass, half the bag spilled out all over the floor. The rats have been having a field day. The filth all over the motorcycles is rat #$%* where they’ve been climbing and crawling all over them. It is a mess.

Of course the grain has now been cleared up, but the rats won’t go away. Now they’re chewing all kinds of stuff. I am going medieval on them. The most barbaric traps known to man are deployed with tasty morsels scattered around them. One down and an unknown number left.

I had mice getting into my dog food, which I had left sitting on the ground in the garage. Same thing...noticing mouse turds behind the refrigerator in the garage and then I found it...picked up a bag to dump into the container I use and a hole chewed through a bottom corner of the bag and kibble spilling out.

So snap traps baited with peanut butter, snap traps baited with dog food, snap traps baited with a special mouse 'attractant', traps baited with mouse poison, D-Con traps, small containers of a food they eat that makes them stop drinking and they 'mummify', cotton balls soaked in peppermint oil, sonic repellents, an LED 'disco light' timed to go off at random times to 'chase them away, and the most effective of them all, sticky traps placed where I could see the path they followed the most. It was a like a rodent war zone in my garage.

Finally got all of the little *******s and haven't seen one in about a year now and I now store my dog food bags in an airtight container with a locking lid.

They're a pain in the *** and hard to get rid of and they crap and pee on everything...

 

[Parminio]

I had mice getting into my dog food, which I had left sitting on the ground in the garage. Same thing...noticing mouse turds behind the refrigerator in the garage and then I found it...picked up a bag to dump into the container I use and a hole chewed through a bottom corner of the bag and kibble spilling out.

So snap traps baited with peanut butter, snap traps baited with dog food, snap traps baited with a special mouse 'attractant', traps baited with mouse poison, D-Con traps, small containers of a food they eat that makes them stop drinking and they 'mummify', cotton balls soaked in peppermint oil, sonic repellents, an LED 'disco light' timed to go off at random times to 'chase them away, and the most effective of them all, sticky traps placed where I could see the path they followed the most. It was a like a rodent war zone in my garage.

Finally got all of the little *******s and haven't seen one in about a year now and I now store my dog food bags in an airtight container with a locking lid.

They're a pain in the *** and hard to get rid of and they crap and pee on everything...

If your pets don't hang out in the garage, there's no need to go all nasty with traps. Just buy some of this poison. You're supposed to put them in bait traps and all, but I found that never worked. I just laid them out around the garage floor. Put one in each corner, one about half way along each wall, one under the riding mower, and one under the Vmax. Over the span of about a week, it all vanished. They all died. ALL OF THEM.

Apparently they would eat their fill and go back home and tell the others. Then they would come and eat their fill, etc.

I've not seen a mouse since and that was just over three years ago.

 

[cdgawatersports]

What kind of wheels are on that black bike and are they fcr carbs?

 

[CaptainKyle]

What kind of wheels are on that black bike and are they fcr carbs?

Rc components wheels and yes UFO Vgas FCR

 

[maleko89]

Cases split. Nothing looks off so far. Did find out engine has Boss 79 mm pistons so looks to be a 1300. Explains why best rwhp on dyno was 133.

 

[Parminio]

A bit off topic, but at the same time on topic. Sort of.

I went to Amazon to order a new pair of inserts for my house shoes. While there, I needed some new wiper blades for my car, so I typed in "wiper blades for my car".

Good to see Amazon is on the ball as always:

 

[patate657]

Okayyyy... The starter clutch clattering is back and getting back to it's normal noisy starts. New Starter Clutch installed, 2nd time. This time swapped out the 2 small shafts and sprockets too. New bolts torqued and peened. Starter itself had been changed also. Battery shows good and stays fine on Trickle. Thinking maybe buying a new Battery...? Any ideas guys?

 

[CaptainKyle]

Okayyyy... The starter clutch clattering is back and getting back to it's normal noisy starts. New Starter Clutch installed, 2nd time. This time swapped out the 2 small shafts and sprockets too. New bolts torqued and peened. Starter itself had been changed also. Battery shows good and stays fine on Trickle. Thinking maybe buying a new Battery...? Any ideas guys?

Need to check your voltage while you are starting it and see if it has a significant draw. Also the gear that the clutch mates to the bushing on it could be worn to much they won't even change them at the dealer without changing that gear .

 

[patate657]

Need to check your voltage while you are starting it and see if it has a significant draw. Also the gear that the clutch mates to the bushing on it could be worn to much they won't even change them at the dealer without changing that gear .

Will do and could you send me a picture of that gear, please. I'm looking at diagrams of the starter clutch but not sure which gear you're talking about. If it's the largest gear shown, I checked and saw no wear.

Thank You

 

[CaptainKyle]

Will do and could you send me a picture of that gear, please. I'm looking at diagrams of the starter clutch but not sure which gear you're talking about. If it's the largest gear shown, I checked and saw no wear.

Thank You

I can get pictures in the morning but it is the large gear that goes directly against the starter clutch that the rollers run against.

 

[patate657]

I can get pictures in the morning but it is the large gear that goes directly against the starter clutch that the rollers run against.

OK. No need for the picture. I know the one and I saw no wear on it. I'll check the volyage while cranking and go from there. Thank You Kyle....

 

[one2dmax]

Cases split. Nothing looks off so far. Did find out engine has Boss 79 mm pistons so looks to be a 1300. Explains why best rwhp on dyno was 133.

Get close up pictures of the mating gear dogs. Examples attached of various damage to look for

 

[wayne billings]

installed bearings, crank and balancer . buttuned her up and she spins free. Pistons are next.