Front and Rear Tire Matching
Correct matching of front and rear tires is important for peak performance and handling. Mating a new tire with a worn tire is never a good idea. It is best to follow the Tire Selection guidelines provided by the manufacturers and change out both tires at the same time if possible. A new front tire with a worn rear tire can cause instability.
Also, make sure that the tires are mounted in accordance with the directional arrows. There are two main reasons for directional arrows. The first of these is that some motorcycle tires now have tread patterns that are designed for a specific rotation for optimum performance, particularly on wet roads. Directional arrows indicate the proper directional rotation.
Secondly, running a tire will set up a wear pattern and it might not roll smoothly if reversed. Use the directional arrow to re-fit a tire in its original direction.
Off-Road - It isn't as important in dirt to have matching tire sets. Plenty of riders even swap brands between front and rear based on their personal preferences. When it comes to wear, if you can afford a complete set at every change then go for it, but a front tire will generally last as long as two rears. Again, look at the wear markers and always err on the side of safety. Most off-road tires are not directional and can even be reversed to stretch additional life out of them. But, there are some, especially soft-terrain and dual-sport meats, that can have a specific rotational tread pattern. Always make sure to pay attention to any arrows or markers on the sidewall and obey them.
Tires have a lot of technology in their construction these days. Different compounds and tread patterns create the ultimate blend of performance and longevity. But, mixing radial and bias is a no-no in most circumstances.
Don't Mix and Match Bias and Radial Tires
Bias and radial tires have significantly different dynamic properties. Bias. bias belted and radial tires have different construction types and therefore have different abilities to carry side and peripheral forces as well as having varied damping characteristics. The introduction of radial tires required changes to certain characteristics of the motorcycle. The development of the radial tire led to frame modifications, new steering geometries and suspensions. That's why it is recommended that a motorcycle be used with the type of tire construction that it came with originally. Do not mix bias ply and radial tires on the same motorcycle unless it has the approval of the motorcycle or tire manufacturer.
Tread Pattern and Compound
Tread pattern is the outer part of the tire and in contact with the road. The profile of a tire and the rubber compound chosen is based on the use of the tire. Generally,
street motorcycle tires with a harder rubber compound get better gas mileage but don't stick to the road as well. The softer the rubber compound, the grippier a tire is, at the sacrifice of gas mileage.
Tread has everything to do with the circumstances you'll be driving in most. A treadless racing slick will stick to the road like glue but is useless in the rain. Tread is needed for traction in wet conditions. That's why off-road tires have a very high tread. It enables them to maintain traction in the mud and deal with the adverse geography of off-road riding.
Tread builds up heat within a tire and reduces its effectiveness. An all-round tire has a light tread with a medium-hard compound base. This arrangement allows it to travel many miles without breaking down fast and provides stability in varying conditions.
![Bovemanx Motorcycle Phone Mount Holder, [150mph Wind Anti-Shake][7.2inch Big Phone Friendly] Bike Phone Holder, Motorcycle Handlebar Cell Phone Clamp, Compatible with iPhone 16 Pro Max Smartphones](https://m.media-amazon.com/images/I/51F+1sontPL._SL500_.jpg)
