TheTwistedNomad
Well-Known Member
http://www.amazon.ca/SODIAL-Flasher...m_sbs_s_2?ie=UTF8&refRID=1M450CVZG108Z69BVY5D
Is the pin configuration correct for the Max?
Is the pin configuration correct for the Max?
Will this 2 pin flasher relay fit the Max for slowing down LED flash rate?
Help Support VMAX Forum:
[email protected]
Well-Known Member
I installed a 2 pin LED flasher from the auto parts. It didn't work.
I bought a 2 pin LED flasher from custom dynamics and it did work.
Not sure what the difference between the 2 were :confused2:
IF it works, you will lose the self cancel feature
I removed the Brown and the Brown/White wire from the OEM flasher connector and hooked them up to the LED flasher and all was well.
Most likely, you will also need to either remove turn signal indicator bulb in the gauge cluster or, install a diode on the wires for the LEDs to work right.
I bought a 2 pin LED flasher from custom dynamics and it did work.
Not sure what the difference between the 2 were :confused2:
IF it works, you will lose the self cancel feature
I removed the Brown and the Brown/White wire from the OEM flasher connector and hooked them up to the LED flasher and all was well.
Most likely, you will also need to either remove turn signal indicator bulb in the gauge cluster or, install a diode on the wires for the LEDs to work right.
