crankcase

Apparently coolant is leaking from the crankcase breather housing. If I ride like this, is it possible for air and oil to mix in there somehow?

do i have to drain the oil before removing the left crankcase cover?

Can't seem to find it on the parts fiche on-line. Anyone know the part #

as i find myself running out of things to do with the bike, that are financially reasonable anyways, i saw a v max in the uk with this mod. it is for a stage seven setup if you're not running the dynajet breather tube. i run the crankcase breather hose to a filter located under the faux tank...

Hi i have flatslide carbs on my VMAX but where to put my crankcase breather ?

Has anyone tried running with the top of the airbox off? Seems like it would get much better air flow than just the two small inlets built into it. Can you plug the crankcase inlet on the airbox and just put a filter on the end of the hose to vent crankcase the to atmosphere? Will this hurt...

Wondering what you guys are doing about the extra pressure from the crankcase. Are you using stock breather or STG 7 set up or how are you managing excessive oil from blowing out the breather?

I have a crankcase breather hose sorta like on the stage 7 kit and the stock breather hose coming straight up to the air box that is no longer there, so I got a T fitting and connected both hoses and put a little cone shaped air filter on the other,the filter is getting caked with oil. I'm I...

My max didn't have the breather hoses when I bought it. Is this bad for it? Tom

Well here it is my $23.00 Crankcase Ventalation for the individual air filter setup. Hope this prevents any oil blowing to my battery box. How close is this to Dyno jets Stage 7's kit?

Hi. On all the stage 7 carb setups, I see what appears to be a crankcase breather w/stainless hose. 1. Is my identification correct? 2. What does this do (really) 3. Can I get one without going the stage 7 route? Thanks Chris Please bump this to the correct forum if this does...

Hello all - first post this is for a -05' Anniversary Edition Previous owner dropped the bike in the garage and scratched the "star" crankcase cover by having the brake pedal hit it. The left side cover has the removal screws, but nothing on the right... After looking at a parts diagram it...

Forgot to ask but why do I always see one line going into the can and two coming out? Can one go in and one come out. Do you have to have the same cross-sectional area going in and coming out? I want to make my own can and need to know before starting.