pistons

hello does anyone has the size of the oil seals and dust seals? or in lack of those the piston size? upgraded the master to a 19mm radial nissin but still more lever travel than i am comfortable with. seems some pistons are getting stuck,already removed the dust seals as they were shot but...

I have one set of good pistons for half a front caliper $20.00 delivered in the lower 48.

Sold New Carrillo Rods and Dished pistons for a 1340cc build Sold New set of stock lenght Carrillo H beam connecting rods 18 mm wrist pins and a set of gas ported dished pistons for a future 1340 cc blower motor. I also have these on an Ebay auction so the pricing might be a little different...

I got a set of pistons on ebay that seller said were for a 1300 motor. They supposedly came out of a very low mileage motor, they were very clean so I got them. It was worth it to me to get them just for the rings. They are very nice, but they are 1200 VMax pistons. Probably be a loose fit in...

Hey guys just was wondering if you could give me a bit of info on where to find parts and if they are needed? I am putting together a new turbo setup and am going to rebuild the whole motor this time and do it right. I am figuring the power is going to be in the 180-200 horse range running a...

What'll give me the bigest power increase for the least money? Would a nos system blow a stock engine to the moon? At the moment all I have is a 4-2-1 dragster exhaust and soon to be fitted morely muscle jet kit. I made the mistake of riding a gen 2 very briefly and now mine feels slow!

Does anybody know if i can install a turbo charger in my v-max which has carrilo rods and je pistons high compression. If i put a gasket so i will reduce the pistons copression will it work.????

Does anyone know if the Venture 1300 pistons can be used in the max. It would have to be bored out to 79mm roughly. I know that Sean through Ross pistons can go up to 78.5 but even at 79mm there is still 4mm thickness. and with the 1500cc big bore kits the sleeve thickness is about the same. I...

I decided to change brakes on my bike, but the problem is, brake pistons wont allow any room for the new ebc HH pads... So how would i push them back? Im talking about front brake

Hi anyone know if I can get high comp pistons (12/1) whitout bigbore the cylinder, I know I can get 1300ccm and 1500ccm but what about 1200ccm?

Just curious if I can swap the later model bigger rotors and calipers from a 93 and later to a 90? thanks.

Where is the best (least expensive) place to get oversize pistons. I read on another thread where someone got them for 45 apiece. The sight I usually use are 63 + 35 for rings. That's 380 + shipping. Pretty steep for a poor mechanic. I need 1 step oversize, looks like some water was in #3, got a...