I have an 85' Vmax with Stage 7(vboost always on) and a Maxflo exhaust. I took the carbs off and gave them a good cleaning and reinstalled them on the bike. Bike idles nice at around 1K but the left rear carb(#2? The one with one the same side as the master to sync to) has super low vacuum at idle. Turning the adjustment doesn't really change it. I am able to sync the other 3 with a Weber unit but can't get that one to change. It does exhibit more vacuum when you blip the throttle but then goes back down. Does this sound like a vacuum leak? Was going to pull them back off and check the boot but thought I would see if there was anything else that might obviously be?
Thanks in advance for any advice!
Martin
Thanks in advance for any advice!
Martin