I recently got a 2005 VMAX from my brother. He is currently deployed and is unable to answer questions. Not sure how long the bike was in his garage, but the rear cylinder on the left side (While mounted) is misfiring at lower RPMs. When I get now the throttle pretty good I don't notice any loss of power or performance. I checked and replaced all plugs with no change. Old plugs looked ok. I little corrosion on the socket area, but nothing real bad. After the new plugs, same problem. I am thinking fuel(Carb) partially clogged or plug wires? Am I way off here? Not a great mechanic, but I know enough to get into trouble. This is my first motorcycle in 20 years, so many things have changed. I am currently running B-12 fuel system cleaner to see if that will jar loose the carb. Any other help would be great. I don't like the way it sounds, kind of embarrassing. Bike has 20400 miles and is still very strong.
Help Support VMAX Forum:
HyperPete
Well-Known Member
I am far from an expert on the VMax, but if you search the forum for "Peashooter" and "Shotgun" you will find details for cleaning the carbs. in two different ways. That might be a good place to start. I'll try to find my bookmarks for the same for you.
HyperPete
Well-Known Member
HyperPete
Well-Known Member
Hyperpete, did you see Frank Zappa's wife just died? I saw him several times, always a great show. I have lots of vinyl of his, yes, vinyl.
https://www.youtube.com/watch?t=2&v=3LvEpOMlZG0
Carb cleaning is so satisfying when you take your time and it goes well.
https://www.youtube.com/watch?t=2&v=3LvEpOMlZG0
Carb cleaning is so satisfying when you take your time and it goes well.
HyperPete
Well-Known Member
Yes, Gail Zappa died at the age of 70 yesterday morning. I sent my condolences to Dweezil and his family. She's with Frank, now. RIP to them both.
HyperPete
Well-Known Member
Look at my third post in this thread, and click on that link.
Thats .8 to .9 mm....which works out to be .032 to .035. Gap to .035 for the best hp.
