• If you have bought, sold or gained information from our Classifieds, please donate to VMAX Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Parts For Sale Parting 1998 Restoration-Custom Project

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

one2dmax

Moderator
Staff member
Moderator
Joined
Apr 6, 2006
Messages
16,965
Reaction score
1,565
Location
Derby Kansas
85-07 Vmax VMX 1200 Parts
EMAIL is preferred at [email protected]

Parting out a project build (1998 Vmax).

$700 - Custom fuel tank and tail section. We modified the tank by adding length to the back and moving the connection point under the tail section. This includes a custom fuel cap. You would need an extended swingarm to work with this assembly (which we can provide as well for additional cost). This will still require some additional work on the tail section to finish and make ready for installation.
$500 - Mad Max Forward Control Kit. Includes a few powdercoated parts as pictures.
$150 Pair (normally $120 ea) - Moto Gadget Mirrors MT440001
$200 - Black Wheels w/good tires (does NOT include rotors or add $150 for all three rotors). *Note shipping will be high since these are heavy with the tires on them.

EMAIL is preferred at [email protected]
 

Attachments

  • 20231229_093846.jpg
    20231229_093846.jpg
    3.5 MB · Views: 2
  • 20231229_115433.jpg
    20231229_115433.jpg
    1.7 MB · Views: 0
  • 20231229_124655.jpg
    20231229_124655.jpg
    2.7 MB · Views: 0
  • 20231229_130226.jpg
    20231229_130226.jpg
    3.1 MB · Views: 0
Last edited:
85-07 Vmax VMX 1200 Parts
EMAIL is preferred at [email protected]

Parting out a project build (1998 Vmax). Many other parts not pictured (including a nice powdercoated frame assmebly posted in another listing)

$50 - Coolant Junction Chamber. This has been bead blasted and stainless fasteners used to mount it to the plastic base plate. Sensors in good shape and ready for installation.

$80 - Powdercoated Frame Brackets. Includes electrical support racks front and rear plus fuel pump and faux latch brackets. Also has a couple of small misc brackets for the sidestand.

$200 - NEW COP coils with Splicker Adapter harnesses. These do NOT have the resistors installed. Normally I suggest using these with Ignitech CDI's (I have them available too).

$500 - JW Speaker 8790 Adaptive 2 - High end LED headlight and Emgo bucket.

$50 - Nice well made (unknown brand) - Turn Signal set.

$50 - Radiator Fan Assembly with Powdercoated Shroud and Stainless Fasteners.

$600 - Powdercoated Frame Assembly with Centerstand. DOES NOT INCLUDE the front forks temp installed in the picture.

EMAIL is preferred at [email protected]
 

Attachments

  • 20231229_095916.jpg
    20231229_095916.jpg
    1.4 MB · Views: 0
  • 20231229_110818.jpg
    20231229_110818.jpg
    1.8 MB · Views: 1
  • 20231229_111016.jpg
    20231229_111016.jpg
    3.7 MB · Views: 0
  • 20231229_111452.jpg
    20231229_111452.jpg
    1.4 MB · Views: 0
  • 20231229_114553.jpg
    20231229_114553.jpg
    1.1 MB · Views: 0
  • 20231229_124629.jpg
    20231229_124629.jpg
    2.5 MB · Views: 1
  • 20231224_091301.jpg
    20231224_091301.jpg
    3.2 MB · Views: 0
Last edited:
Back
Top