user 16333
Active Member
- Joined
- Aug 17, 2018
- Messages
- 39
- Reaction score
- 4
2009 Vmax mods: Gurued Gear ECU Re-flash ~ Akrapovic exhaust.
There are currently no error codes, and no codes currently in history.
This started about two years ago, the bike would stall one time every 3 months or so.
About 6 months ago it got the point where it was stalling 1 to 3 times a day.
A few months ago it became unrideable, code 11 displaying, she would die constantly,
you had to pull over and wait before it would fire up, sometimes 30 minutes. Replaced
the Cam Position Sensor. Got the bike back from the shop with the same problem. Cleared
the code and that took care of stalling issue 1.
A day later, it stalls about 2 or three times a day. With this stall, I can pop the clutch, it
fires (most) every time. When she stalls, (this time and before) it’s a total engine shut down,
no sputtering, both at cruising speed or at idle.. Electrics do not cut out.
The bike has 35K, I have not replaced the plugs, but the bike runs strong, no misfires..
I add Seafoam every few tanks. Generally, babied, I change fluids/filter often.
I live about 200 yards from the ocean, so it does get salt air.
The Yamaha dealer doesn't seem to have a clue, they are conferring with a Yamaha rep.
I see more expensive guess work on the horizon if left in there hands.
I wonder if anybody has the same problem or could assist me?
Recent work last 6 months:
Recharged air filter, new battery, stator, rectifier regulator, starter motor, coolant.
Recall for part of the wiring harness, Cam Position sensor replaced. Oil/filter.
There are currently no error codes, and no codes currently in history.
This started about two years ago, the bike would stall one time every 3 months or so.
About 6 months ago it got the point where it was stalling 1 to 3 times a day.
A few months ago it became unrideable, code 11 displaying, she would die constantly,
you had to pull over and wait before it would fire up, sometimes 30 minutes. Replaced
the Cam Position Sensor. Got the bike back from the shop with the same problem. Cleared
the code and that took care of stalling issue 1.
A day later, it stalls about 2 or three times a day. With this stall, I can pop the clutch, it
fires (most) every time. When she stalls, (this time and before) it’s a total engine shut down,
no sputtering, both at cruising speed or at idle.. Electrics do not cut out.
The bike has 35K, I have not replaced the plugs, but the bike runs strong, no misfires..
I add Seafoam every few tanks. Generally, babied, I change fluids/filter often.
I live about 200 yards from the ocean, so it does get salt air.
The Yamaha dealer doesn't seem to have a clue, they are conferring with a Yamaha rep.
I see more expensive guess work on the horizon if left in there hands.
I wonder if anybody has the same problem or could assist me?
Recent work last 6 months:
Recharged air filter, new battery, stator, rectifier regulator, starter motor, coolant.
Recall for part of the wiring harness, Cam Position sensor replaced. Oil/filter.
Last edited: