Thanks to "Firefly," I finally got my RICOR's as opposed to the Gold Valve Emulators.
Without searching through many threads:
FYI, I found adjustable preload fork downtube caps on a Japanese site, sized for 43 mm tubes. I forget what the price was, probably in yen anyways. People were asking about them recently.
Addendum:
I read the sticky & saw 21 oz (20.9) is recommended, 4.8 " down from the top of the downtube, 15 wt oil.
Should I just cut a length of PVC to the stock length minus the height of the RICOR's?
Without searching through many threads:
- what is the static sag I should be using, which I think is the distance above the open downtube the spacer should be portruding, (the spacer in the factory exploded diagram is #9, collar) and
- what oil level should the measurement be, measured from the top of the open downtube, to the oil level, with the damper rod in, but the RICOR and fork spring out, and the slider pushed-up as far as it will go on the downtube?
FYI, I found adjustable preload fork downtube caps on a Japanese site, sized for 43 mm tubes. I forget what the price was, probably in yen anyways. People were asking about them recently.
Addendum:
I read the sticky & saw 21 oz (20.9) is recommended, 4.8 " down from the top of the downtube, 15 wt oil.
Should I just cut a length of PVC to the stock length minus the height of the RICOR's?