wheel run out

[huskyman510]

After a few test runs I have what can be describe as a bad wobble in the front end.

I know I know this is a constant subject but was wondering, how much run out on the front wheel is allowable?
Steering heads perfect, wheel bearings appear in great shape.
50kmh-80kmh bad wobble that can be seen in front wheel.
Tyre is seated right
The run out that Ive tested while spinning wheel and holding a screw driver against rim gives me about 3-4mm from touching to oposite side.

I cannot remember the last time it was on the road 12months ago that it was that bad.
Is it a case of getting a new rim? or maybe go through the front end again and check all.

 

[Traumahawk]

Have you changed the wheel bearings?

 

[Fire-medic]

Radial or lateral runout per Service Manual = 2 mm (0.08")

 

[jfeagins]

How bad is your back tire runnout? Might as well check that end of the bike too, while you're at it.

Over the years, every time I get age on a front tire, and it begins going bad, I've gotten mirror shake. Every time I get a back tire giving grief, I end up with handlebar slapping wanting to happen. I've never had a bent rim though.