Search results

i am doing some research and i am really confused cause i cannot find a clear answer. does the restrictricted engine have different camshafts with the open model and diffrent timing or it is a myth. Does anyone have any info ?

yeap it was the cdi. replaced all good now

i was diggin arround and found this ? do you think this can be my solution ?

the rollers are from hard plastic, but the body of the card is not pure alloy is a mixture of alloy+zinc thats why the plastic rollers make grooves in the body, i thought of inserts but have my doubts if it is going to stay there cause of the vacuum. also the grooves are uneven so it is better...

a video from youtube may help you understand the rollders are small wheels that rolls the slide

this is the fcr slide , it moves on rollers when going up and down, this rollers make a body wear, usually in the idle possition where it sits more that the open throttle possition. it wear the body and the rollers sit in the gaps they make in the body.

this is not my body cause i didnt take a pic, but it is exactly like that, the rollers sit in gap and make all the problem

update, as i said that does it also without the throttle cables attached. i stripped the again and again installed them again and again , started to isolate one carb from the axle that pulls the vaccum slide, so my engine run on 3 cylinder to see if it was a specific one. and yes it was a...

as i mentioned it does that also without the throttle cables attached, i contacted pcw gave me some details i checked all jets, float level, needle clips e.t.c new boots on the carbs. no v-boost with fcr, every carb has its on intake to synch it so they are isolated, the thing is i am...

i will be pleased if they are out of sych and do that . it is something it can be fix easy.

is this possible to happen if the carbs are not synch ? i tried to sync them with measuring the gap with a small drill cause here where i am transferred i cannot find synch carb guage tool anywhere. i removed completely the idle screw and made all slides equal to just fit a tiny drill inside...

alright fcr guru's i need some help. checked all vaccum seals which they in very good condition, it does that and without the trottle cables, it is a bit annoying (not bit i am just polite) any been there and tell me what to check . checked the floating bowls, checked all jets , i have...

i have a burnett clutch plate with almost 4000 km , do you thing the bearing can go bad. it was sitting although almost 3 years

All engines i had every one made a slightly ticking sound when in neutral and clutch released . When you press the clutch it goes away. Does anybody know why is that .and if it can be eliminate it

so after almost 3 years i am back on the roads, before 2 days as iwas riding my no 1 cylinder stoped firing, things i have checked checked if i had spark. No spark replaced with new spark plug - No spark replaced the ht coil with the right one to see if i had spark - No spark , my bike...

I send you pm Στάλθηκε από το GT-I9505 μου χρησιμοποιώντας Tapatalk

I am talking to this man everyday. We dont think is a bearing and Sean believes that if it was a bearing the knock would be heard and in throttle. With the guy that rebuilded the engine we took apart today the clutch system replaced the basket with a second one i had in hand synched the carbs to...

Sean already gave me his info as we talked it on Fb. This knock shouldnt be there. I try to eliminate all possibilities so i wont have to tear my emgine apart AGAIN Στάλθηκε από το GT-I9505 μου χρησιμοποιώντας Tapatalk

blackmax as you can see from the pics i have a heavy duty starter clutch from Sean as you saw in my video my bike starts with the press of the button... but the sound in the second video despites that my engines starts with no problem is pretty close to what i hear only with knocking is witha...

hello experts, need an advice cuase i going to get nuts. the last week i hear a knocking when my engine becomes little warm on i idle, it is definetely not the fcr rattle. when i engage a gear a letting the clutch lever the knocking goes away, when i ride and open the throttle all sounds...