Search results

Blax you can correct me if I'm wrong but the left front doesn't have adjustment it's what you set the rest to. Also the right front adjustment is for the right front & right rear is for the right rear. The A/F screws shouldn't turn that hard that you feel there going to brake. Dave

On the video the top left one seemed to fast. I would take a look at all of them. Fuel pump psi I would think should be around 3 to 4 psi & not over 5 or 6 tops. Dave

Maybe this has already been mentioned but have you checked the vent line to the tank to make sure it is opened. Dave

It's hard to tell by those pic. but the slide looks scored & the needle doesn't look straight. When you work the slide with your finger does it move smooth ? Also when you push the slide all the way in if you put your thumb over the large oval hole the slide when left go should move very slow if...

I'm sure there are good products out there & Sea Foam is one of them. I would say Star Tron for all around protection is tops. I use it with every tank full for 2 yrs. now & no problems also tank has stayed clear of rust. But don't take just my word check into it for your self. Dave

It sounds to me like you have everything. Dave

Your test #'s on the coils are good don't think that's what it is. Dave

Star Tron

Blax it goes right on the front of the rear seat behind the gas cap. Dave

The serial # should be stamped in the neck under the sticker. Dave

Check the starter button to make sure it's not sticking. Dave

I'm pretty sure you can only lock it in one way.

Hi If it was fine up to that point I'm going to say it's the free play slapping around in there. Dave

I'm glad it went right in for you not sure why mine hit. I think the fan spins at 7000 rpm. Dave

Just curious why would you want to destroy a perfectly good V-Max. Seems like we lose enough so as it is needlessly. :ummm: Dave

Hi Blax If yours fits great if not you already have a dremel. I used a endmill to take the material out. I didn't go threw but did make it pretty thin. I'm pretty sure your going to like it. Uses less then half the watts of a stock bulb. :eusa_dance: Dave

Hi Orion Not to be smart are you sure it fits right ? :ummm: I have the same bulb & love it but I had to take a good 1/8" out of the back of the bucket for the housing to clear. Dave