Search results

The starter switch is a grounding point for the starter contactor coil..................completes the path to ground................does not supply 12vdc to the coil...........................I have checked the resistance from the switch to the starter contactor coil and it is low, what I would...

If it was the ignition fuse you wouldn't be getting the oil and fuel light when you press the start button............once I confirm my diagram then I can start tracing wires...................diagram looks funny.................

Now I'm almost back to square one.................can not find problem with not being able to start VMax...............I have even drawn up a new ladder logic control diagram for better visualization...........start circuit doesn't look right based on the schematic I copied it...

Found the device

Found the relay buried inside the frame in the front fork bearing area.....................I think I have everything I need now

I found a better wiring diagram on the forum and it seems to fit my wiring harness that I have..........now I just need to find the "starter circuit cut-off relay" shown as a separate device on the wiring diagram...........I've got everything removed on the left side to include the backing panel...

I need the 1993 wiring diagram for my VMax...............the diagram that I have in the Service Manual published 1992 doesn't seem to fit.........in particular I'm looking for the starting circuit diagram..................thanks

My 1993 VMax won't start and I'm trying to troubleshoot the start circuit, however, I've found that my service manual diagram doesn't match my physical layout................ I can't find this device, starting circuit cut-off relay(item 30), and it is not part of the turn signal connector or...

My bike is a 1993...............not familiar with the signature line................and am not seeing other posts with bike information................thanks

Starter switch is sticking and has to be pushed at the pivot point to bring the switch back to neutral position. I opened up the switch and cleaned with silicone spray and switch is still sticky. I also used brake cleaner quickly followed by silicone spray. There seems to be mechanical...

Sharp eye...........I didn't review the information, assumed it was accurate..............how about this............ 555 Timer Astable Calculator Description Time High (T1) 0.693 × (R1+R2) × C1 Seconds Time Low (T2) 0.693 × R2 × C1 Seconds Time Period (T) 0.693 × (R1+2×R2) × C1...

Royce, here's what the 555 circuit looks like in case you haven't found it yet.................. This is the astable circuit whichs oscillates when power is applied to the circuit............an output device like a transistor or small relay would be connected between pins 3 and 1.

Another 8 pin device you should be familiar with is the Picaxe controller which is made in the UK. I've used these and they are easy to program and program in basic, IDE is free. The detailed info can be found here: PICAXE Chip Sizes - What is PICAXE - PICAXE

Probably not a common Vboost problem.................I discovered that the cable attachment to the DC servo motor housing was not installed properly....................there's apparently a small collar that fits into the housing to align the cable with the pulley on the...

Also bought two of these same filters on ebay for $10 bucks...................I think I have enough for awhile 2 PCS Fuel Filter fits for Yamaha XVS1100 V Star 1100 Classic 2002-2009

Yes, I am aware of the two wire type devices............thanks. I have already tried out the RC servo, a 20 kg unit, and it has more than enough torque to run the throttle plates..............and yes I'm considering methods to make sure that I don't over torque the throttle plate shaft and...

Based on your apparent level of experience with microcontrollers, I would suggest going to YouTube and searching for Arduino Nano or Uno projects and learning tutorials...........that's where I got most of my information................plus you need to be able to follow the actual experiments...

What is it you would like to know?...................I'm not an expert but have a working knowledge of the device

Pulled my gas tank yesterday..............been sitting for 5 years................gas looked like orange gatorade...................fiberoptic inspection confirmed my suspicions, lots of rust.....................put in a gallon of muratic acid and moved liquid around in the...

I ordered this on Amazon and found that they look like the exact same filter on the VMax and are the exact same size give a mm or two......................$9 bucks for two filters....... AISEN Pack of 2 8MM Fuel Filter for Kawasaki 49019-1055 FD501D FD501V FD590V FD611V FD620D FD661D FD671D...