aftermarket

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. shicks16

    Aftermarket signal resistor calculation

    I have been asked a couple times what size resistors to use when converting to LED signals or other after market signals, so i created a spread sheet to calculate it for you, all you need to do is measure the resistance of your oem signals and your new signals and punch it in, it then tells you...
  2. P

    Aftermarket Master Cylinders

    Not too long ago I saw a thread from someone that replaced their master cylinders with some aftermarket ones and they included a link. I tried searching but haven't been able to find it. I forget the brand name, but I remember them being decently priced. You picked out the master and then...
  3. S

    Anyone ever repack their aftermarket muffler?

    So yesterday I decided to take apart my Kerker. Don't ask why, I was curious to see whats inside. I took the baffle out and the thing was empty. All I had in my hand was a metal screen attached to the tip. The thing had no packing in it. Its loud, but not obnoxious. But I wouldn't mind toning it...
  4. WIKDMAX

    Aftermarket handlebars

    Well I tried a search but never found anything overly useful so figured I'd ask outright. I am looking for a replacement handle bar about 31" wide and about 2" taller than stock. Any recommendations?
  5. T

    Are aftermarket fork braces worth it?

    Hi Guys, I just bought 2 new Shinko tires for my 96 and was thinking of installing an aftermarket fork brace in the process. Is the stock one on the bike good enough? I don't want to burn a $100 bill if it's not going to do anything. I kind of like the looks of the UFO one. I did search the...
  6. 95spfldmax

    New Aftermarket Vmax Seat...Did You Hear???

    So, me and the guys were hanging in the garage like we usually do throughout the winter on Friday nights, fixing and breaking things motorcycle.....drinking down a couple..... Anyways, one of the guys comes in that recently just startd hanging around with us and shows me this flyer about a NEW...
  7. V

    Tyga fender + Aftermarket Fork Brace=No Go?

    Bought a Tyga carbon front fender and aftermarket fork brace at the same time. Tried to install them but holes in the brace and the fender did not seem to line up. The weird thing is that the stock brace works fine with the Tyga fender and the aftermarket brace works fine with the stock...
  8. RaWarrior

    How to: install an aftermarket temp gauge

    I've never been a big fan of the "dummy" gauges that don't have any numbers on them. For whatever reason, they kind of annoy me. If you're going to bother with an actual gauge instead of an ***** light, might as well do it right and calibrate it rather than just slapping a "hot" and "cold" line...
  9. medicineman843

    Just Bought 86 Vmax Need Help!

    Hi, I just bought my bosses 1986 Blk vmax. It has 4 to 1 Kerker exhaust, K/n filters, Stage 1 jet kit, New headers. He is the original owner. Bought in 86. Only 20,000 miles, hasn't been ran in about 3 years. I've got it at the shop getting a price quote to have her purring again. I was going to...
  10. rebar

    Any aftermarket throttle cables?

    I need to replace one throttle cable because the plastic elbow broke. Does anyone know where I can find something better? Chrome?
  11. B

    aftermarket header diameter?

    Looks like the smallest section of the stock header is 1 1/4 diameter. Are the aftermarket versions of Marks, Kerker UFO all 1 1/2 inch?
  12. madmax06

    Aftermarket horn for the Max??

    I was wondering whether or not there are some "LOUD" aftermarket horns for the vmax... I dont even want to use the stock puny one... it just doesnt do the max any justice... Its like being an adult male with a voice of a 6 year old... With all the stupid drivers where i live, i need something...
  13. E

    Best aftermarket fuel filter?

    Hey folks. It's time to change the fuel flter on my '89. Any ideas as to who sells the best one? Thanks. Elimax
  14. joelyons50023

    jumpy aftermarket tach.

    I have a sunpro 5'' tach and ever since i have hooked it up it is jumpy so i put a resistor in i think .5-1 ohm helped it out a bit til after 5k then jumpy again. my question is should i just use a bigger resistor or do the mod of using diodes to make a four cylender signal for my tach. with two...
  15. madmax06

    Aftermarket air filter

    Hey guys, i need some clarification. I was thinking to upgrade to an aftermarket air filter and i was wondering whether or not i would have to rejet my carb... Here is the 1 im currently interested in...
  16. Lotsokids

    Aftermarket Side Scoop Options?

    I did a search here, but not much came up. I was curious about some custom scoops I've seen, but I didn't come up with anything in searches on the internet. Anybody have a web link they can post here showing some options with prices? Here are some pics I found:
  17. D

    Wanted - used aftermarket 4/2 exhaust system

    Title says it all. I posted topic in the V-Max Parts wanted area, but I think this section gets much more traffic. Didn't post link here to the Parts-Wanted-Section as I am a newbie here, and I do not don't know all the website rules. Thanks in advance for any leads, Dan
  18. K

    Anyone bought any of Yamaha's aftermarket parts?

    I'm interested in possibly buying the yamaha windscreen for the 09 Max. Just curious if anyones got one yet and how they like it. Anyone have anypictures of the 09 with it on? Same goes with the hard saddlebags that yamaha offers?
  19. daves86vmax

    Aftermarket fork protectors

    I was surfing the web for some fork protectors for my 86 and ran across these things.http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Store_Code=CST&Product_Code=17232&Category_Code=fork_prot
  20. kevman

    Vmax aftermarket frame

    I saw this on an UK Vmax site http://www.steelheart-engineering.com/vmaxkit/02.htm and thought someone might be interested in it.Click on logo to enter the site .Cheers Kevman:punk:
Back
Top