big

Does anyone know if this tire will fit a stock rim? 200/70 B 15 M/C 82H TL Metzler

Here at work things are BIG! I was able to get a picture of a service truck parked behind one of the shovels!

A 60+'/110lb flag went up a 150' pole this morning. :flagwaver::party::flagwaver:

I wanted to do some yard work but they wouldn't let me take one home! Gannon

My 97 Vmax has just come out of rebuild. Had a lot of trouble with dirt in the carbs, so str4ipped them and used a rebuild kit - now got good smooth tickover, good pickup of power from low revs but.... at anything more than about 1/3 throttle opening the bike dies. Wont pull or accelerate and...

just to thank you george for all your help and guidance in helping me getting my vmax running again and helping me out with parts!!! if it werent for you she would still be lying in my shed with a big sad face, thankyou for sending me carburettors the bike is running lovely and if your ever in...

well i had a sneaky suspition that i had a bad cylinder so i went ahead and checked all 4. 2 were good with 160psi and less than 10% for leak down and the other 2 were 140 and 20% or so for the leak down. now i think i might as well do the 1260 big bore. what do you guys think. and i might run...

Anyone know what size allen head socket is needed for a early gen 1 fork for the top bolt under the cover? 16mm or a 17mm? thanks

I went ahead and ordered a full 4 into 2 exhaust system for my 2004 Max. I guess the "want factor" finally surpassed my need to keep money in my wallet. I am going to keep the manufacturer "Secret",until the system is fully installed. I will post information about the purchase, video of the...

I must be visualizing things way out of perspective. I thought the Oil Pipe O-Ring was pretty big, like an inch in diameter. I've never actually seen one until now. I ordered The Kawasaki O-Ring from Sean and it came today. It's barely big enough to fit on the end of my pinky...

All, I was just going to send an email to this vendor, but after thinking about it I wanted everyone to know how really good this guy is. As some, or most, of you may have heard I had some problems at the drag strip last weekend. A part on my Max failed and did some damage to my stator. Sean...

You'd need a step ladder to polish these cannons ! http://www.youtube.com/watch?v=Dd531lBcNCE&feature=email

.......to CaptainKyle and Tech Day. Learned a few new things, met nice guys who really like to help. It was definitely worth a day. A lot of knowledge in that garage of yours :worthy: Hope you guys want to go riding some day, just let me know.

OK. My friends dad has two max's. An 87 and an 85. Long story short, the 85 used to belong to a buddy of his. Through whatever events transpired, he now owns it... When I was looking to buy a Vmax, I took a look at his 85 - as he plans on selling it. It has a NOS set up on it, drag bars, a...

Check out the supercharger on this car :biglaugh: http://www.youtube.com/watch?v=JEfC-S5QWJA

Thats the comment i get when i show people pics of my bike. Anybody else get that response?

ok guys how wide of a tire can you fit on a 6x17 wheel?:ummm: Gannon

Just sold my 2004 Duece and bought a 2001 VMAX w/ 1700miles on it. Love it!!!!!!! Only problem I'm 6'1" and 240. I need some some highway/crash bars to stretch out with while cruzin. Any suggestions where I can get something preferably in black. Tanks

I would like to give a big thanks for all those guys that have helped me out over the last 3 months since my trip to the dirt . http://www.vmaxforum.net/showthread.php?t=9935 Now these guys know who they are but i will mention them anyways - Ksnick , Dannymax , Maxcruiser and Jedi- . Now with...

I had a good time in NYC this weekend. I rode 130 miles each way on the poor RatMAx. The longest single trip its done since I got it last fall. I have put over 5000 miles on it in the winter. I ride it almost every day, just not that far away. This was its first trip to a big city and its...