carb

Sean's Kit comes with Shorter Springs.. Will I feel/hear a difference with this Mod?? Does this affect throttle response? Will the RPM's settle more quickly? And Air Correctors.. Anyone care to explain?? I'm already planning for next season!!:eusa_dance::punk: -KarmaKatt- VMOA 5652

Read the thread..not sure if thats it. Here is what I did this weekend. 1) Shotgun cleaning procedure found here vmax.lvlhead.com/tips/shotgun.htm ****I noticed that when I drained the carb bowls of fuel, the left side had gas come out. The right side front had ZERO gas come out. The right...

i am running the vgas setup, and last fall i somehow knocked the velocity stack out of the base on the right rear carb with my knee. when i removed the base of that stack i found that rear mounting "point" for a better word [raised circle of the carb body that the base ears sit on, and are...

2006 with 4,500 miles Just started the bike up after about 2 months storage. Seem to start and idle ok. As long as the choke was on everything was good. As it warmed up I started to get gas running out of 1 of the vent tubes that are mounted on top of the air box. It looks like its flooding...

HI there, My 89' Vmax only has 20,000 miles on it and being a new owner I'm Just getting into fixing the leaks and squeeks before they become larger problems...

looking to rebuild my carbs that were jetted by previous owner...here is the problem...local yamaha dealer shut down and the closest one is now an hour and a half away....does anyone just have a complete kit? maybe one with a good jet kit so i know what i have?....oh and a sink tool too?:ummm:

What would happen if you tried to sync carbs on a bike that was running on 3 cylinders as opposed to all 4? Like if you had a bad spark plug wire or something and one cylinder wasn't firing? Would the sync still be valid? Having a discussion about this on the V4 forum and I was told it...

This may be a Dumb-ass question. But has anyone ever adapted a small (390 cfm)Holley 4bb carb to a simple sheet metal manifold for a v max? I've done it to mostly BB mopars back in my racing days and it just seems like a natural for this v4.

So I rebuilt my carbs a couple of weeks ago. Tanked them, sprayed carb cleaner through everything etc. Also replaced all gaskets, o-rings, etc. I did notice that there were aftermarket needle valves in the carbs so I went ahead and put it back together, adjusted the mixture screws to 2.5...

Made these for Mr Morley. Damn gen 2 need 8 of these suckers, what a PITA lol.:bang head:

I like how the chrome/polished ones look but don't know their exact function (if any). Can someone help me here? Thanks!! Sent from my DROID X2 using Tapatalk 2

The vendor in FL for these is a short distance from me in Miami (N Miami Beach) so today I paid him a visit. I got a pack of 4, I'll let you know how things turn-out. From searching on here, I already tried the "grind-off-the-metal-lip to separate the plastic washers & free the diaphragm." I...

I cleaned the carbs last week and have been running with some seafoam for more than 60 miles but my issue remains. Carbs are already sync too. The bike have an hard time to take the throttle between 1 and 3k rpm. The problem is less with choke or when warm. Also I notice some backfire at low...

INTRO: (skip intro if you want) I'll try to keep this brief, and I've been reading carb threads for days now, yet I'm not sure how far into the carbs I wanna go (without supervision of somebody who's done this before) So, perhaps you've read my thread of "moisture noticed in 1 pipe".. that's...

Looking for carb bodies #1 and #2. I over drilled the pilot screw hole trying to remove a frozen pilot screw. :bang head::bang head::bang head:

Reset my floats last night and stepped up my main jet one size but when I did it I put in some non ethenol 93 octane and resynced and the throttle response is so much better... Don't know if I was just a little outta sync or if its just the gas but it made a very noticeable difference, can't...

I have been having some serious running issues with my 05 lately. I have COP's, stage 1 kit, and K&N filter with the tunnel removed from the top of the airbox. No other engine mods. My bike had been sitting dormant for a couple of months during the heat wave called Phoenix and when I started it...

I am just informing you that it was the exhaust leak that made the motorcycle very difficult to tune and sync the carbs. I am going to go after the leaks tomorrow, also I might need a somebody to suggest what could I use to seal the conection between the header pipes and the exhaust pipes (...

I have just thoroughly cleaned the carbs adjusted floats, replaced the A/F screws, all the rubber jet plate plugs and intake boots. The bike runs like it never has before at WOT. However I cannot get the sync correct, I can sync the right side and the left side but not get them to sync together...

i have low vac on #1 carb snyc the left side got to the right side and #1 carb has low vac i have turned both adjustment screws on the right side and the back carb on the right side vac moves i need help[ its a2003 i got in feb 2012 so im new