damper

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. S

    Hyperpro steering damper

    Does anybody have pics of this setup? I cannot find a single shot of one with any web search.
  2. P

    Daytona damper....

    So... Another 2 hours and $$$ lost... I want to replace the VW damper I have on my Vmax-hack: For a Daytona one which is suppose to go with only a little cut on the plastic frame cover... Of course, and this will be the excuse, the damn thing does not fit with the raked angle of my fork...
  3. wildweasel_pt

    LSL steering damper info

    Hi all Does anyone have fitting instructions or pictures of this setup? The one that has the damper underneath left scoop protruding from below. Thanks in advance.
  4. WVxNitemare

    Steering damper

    Guys for Christmas this year I'm asking for the hyper pro active steering damper. Anyone know who sells them? Sent from my SGH-I747M using Tapatalk
  5. D

    Damper cam?

    I just saw this on Youtube and am confused. Is this in place on GenI as well? http://www.youtube.com/watch?v=UY_n5_9epmA
  6. J

    Part number for spindle "taper" damper rod

    I managed to broke one of damper rods "spindle tapers" see attachment photo. I ordered new to my vmax 2003, part #GM-23173-00-00 it looks totally diffrent( see attachment) The part I ordred cannot be the right one, damper rod do not fit in my opinion, the damper rod do not come out enough...
  7. D

    Carbtune damper tubing

    Where can I get that super-tiny ID tubing to put in my carbtune. I picked one up on ebay with only three hoses. I paid too much, but that's my fault. Either way. I'm gonna make a complete new set of hoses and I need the damper thingies. Also, do we need to use the screw-on adapters? I have 8 of...
  8. VMax-Mike

    Daytona Steering damper

    How do i install:confused2:
  9. A

    Rear Wheel Damper - Cush Drive and powdercoating

    I need to get my wheels powdercoated, however I have been advised by the company doing the work to remove the six rubber drive dampers - cush drive rubbers from the rear wheel as the wheel needs to be heated to 230 degrees in an oven to bake the coating. I have tried knocking them out with a...
  10. C

    how to tighten a damper rod bolt

    My right fork is leaking oil out the damper rod bolt. I compressed the forks all the way and damper rod still spins and i cannot tighten the bolt. Is there a trick to this? forks are on the bike.
  11. gamorg02

    early model damper holder nut size

    hey i can't find it quick, does anyone know offhand what size jam nuts we need to hold the damper rod on the 85-92 forks? i may not be able to use the impact while the forks are in the bike trick, or it might be modified and just want that option readily available. its just a what, maybe 24"...
  12. Fire-medic

    ebay steering damper

    Anyone know what brand this is? Too-rich for my taste! It sold yesterday on ebay motors for $257.52 & $11 shipping. Why, for that price you could almost buy a stock used sissy bar or a stock luggage rack!:rofl_200:
  13. 4gasem

    Yamaha's "Power Beam" Damper

    You guys see this? http://www.autoblog.com/2011/03/22/yamaha-unveils-power-beam-damper-to-control-motorcycle-frame-fle/
  14. O

    Damper removal

    Can the damper on this bracket be taken out? I'm sure it can but how easy/hard will it be?
  15. O

    Footrest damper issues

    The bracket where the footrest attaches to has a rubber damper, and I'm wondering, will the damper be able to resist the temperature (~200) of the oven in the powder coating process??
  16. KJShover

    hyperpro damper

    Some of you guys that are runing that particular setup, could you email me some quazi detailed photos of the mounting brackets, and pics of it on thier bike. Thanks in advance, KJ
  17. bagherra

    Steering Damper

    I really like the Scotts on my ZX12R and am looking into getting something for the Vmax. Seeing how Scotts doesn't seem to be available for the Vmax what do you guys like? I have my eyes on Hyperpro...not sure where to get it from though. :ummm:
  18. 9

    Pic of 2007 Damper Rod

    Does anybody have a pic of the new style damper rods that are in the 2007 Gen 1's? I know that through the years the shape of the top of the damper has been changed and if what I read is correct, the 2005-2007 damper rods don't have the bolt pattern in the top in which to grab on to...
  19. odieoh24

    hyperpro damper mount

    just about to pick up a few more of the items on the wish list for the bike. got the headlight, knee braces from garrett, new helmet to match bike, braced swingarm, rear hugger, and about to pick up a hyperpro rsc damper. i need to source the mount for the v max and couldnt find any pricing...
  20. gamorg02

    Shindy (Daytona) Steering Damper Review

    So I wanted to give a review of the Shindy steering damper now that I have about 1500 miles on the bike with it. Now I know there is some debate on these, so it is purely my opinion. Installation: Time: 2 hours, most being fine tuning the fitment. Installation is pretty straightforward...
Back
Top