damper

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. 2

    Steering Damper

    Hello All, I recently acquired a 94 VMAX and have been just getting to know the bike. One thing that seems greatly lacking is corner stability. I know the tires are down to 20% and need to be replaced, but that wont fix the whole problem. Is there an "affordable" bolt on steering damper, similar...
  2. naughtyG

    Cheapo steering damper

    I'm not ready to spend big $$ on upside down forks, braced swingarms or frame braces, and I like my vibe-free rubber motor mounts. :confused2: However, I would like to feel a like more confident at triple-figure speeds, especially when leaning over slightly, so I've been looking at these...
  3. R

    NEW VMAX Middle Gear Damper

    o....k....... what is that? http://www.youtube.com/watch?v=UY_n5_9epmA
  4. dannymax

    Anybody need a damper rod holder tool?

    I made an extra damper rod holder. It fit my '99, not sure how many others it will fit. If anyone wants to borrow it, pm me or send an e mail to [email protected] dan
  5. dannymax

    Easy damper rod tool

    Here's a couple pics of the damper rod tool I made out of stuff hanging around. Materials: brass reducer bushing, I think it's 1" to 1/2" 24" X 1/2" rigid copper nipple elbow, tee, something to hold on to on the other end These sizes are optional, there are several bushings and pipe sizes that...
  6. COP RUNNER

    Steering Damper

    I HAVE READ THE THREADS ABOUT THE DEATH WOBBLE'S & THE FURBER FIX , ( HEAD SHAKE ) , DOES ANYONE USE A GOOD STEERING DAMPER & DO THEY WORK ON THE V-MAX ? :ummm:
  7. m-cman

    Rear Wheel Damper Question

    What is the best / easiest way to remove and replace the six rubber dampers in the rear wheel hub? Is there a way to remove the dampers without damaging them? I am going the have the wheel powdercoated and need to remove everything that could be damaged by or interfere with the process. Thanks.
  8. S

    Damper Rod Holder Help

    Hello, Does, anyone have pictures of a 29 mm "Damper Rod Holder"? Im not able to find one locally or online, and I thought I'd make one. This is what I know about the Damper Rod Holder: 29 mm Hex Head (male) not a socket T-Handle length is 20" Directions with pictures on how to fabicate...
  9. gleno

    disassembly of the front forks - Yamaha's mystery tool

    Ok I need advice. It's time to replace the fork seals on the 88 front end and I'm not going to touch the forks until I get advice on disassembly. The workshop manual says I need a damper rod holder Part no. YM-01328 and T-handle Part no. YM-01326 to lock the damper rod. Do I really need the...
Back
Top