drain

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. dingy

    2nd oil drain bolt on 1200/1300 blocks

    While cleaning block up today for my winter project bike, I took some pictures of the 2nd drain plug on the 1200/1300 blocks. On the left side, directly under the middle drive cover there is a 14mm head bolt that goes into block and drains an oil pocket. This pocket appears to serve as a...
  2. midnightvmax

    install drain plugs on lower forks

    Hello, I'm going to put progressive springs in the forks and I noticed that if I ever want to change my fork oil in the future I will have to remove the forks or turn my bike upside down, I'd rather have drain plugs to drain the fluid. It looks like there is a place to install plugs if I wanted...
  3. mr.maxx

    drain valve o rings

    anyone know where i can get the o rings for the coolant drain valve assembly? thanky
  4. gamorg02

    oil drain valve

    neat idea, never saw these before. pricey but you'll save money on crush washers and if you're in the market for a new plug anyways: Link here Manf Link
  5. 1

    Coolant drain valve assembly

    Hi everyone, As part of my never ending saga of trying to get my Vmax on the road, I'm now having problems getting the coolant sorted out. I had to dump the coolant to replace the valve cover gaskets (good job I did as the coolant was black), but as part of this I tried to turn the drain...
  6. D

    antifreeze coming out of the drain plug

    edit
  7. J

    Carb won't drain -- what to do?

    Thanks for looking in - I have an 89 that recently started idling terribly because of "ethanol"? messing up the carbs. I tried the peashooter and shotgun methods and solved the problem but after just a few months sitting up this time w/ Stabil - it's idling bad again and sounding terrible...
  8. L

    Best way to drain fuel tank?

    moving to south carolina. puttin' the bike in a uhaul and need to drain the gas to do so. what's the best way of doing this? thanks!
  9. Rand-5107

    O-ring drain valve

    I need to replace the o-rings on my coolant drain valve, but I can' t find a part #. It seems Yamaha wants to sell me a $65.00 assembly instead of a two dollar o-ring. Anybody have an o-ring part number that will fit?
  10. Blackjack

    Oil Drain Plug Size?

    Have 07 vmax with a 17mm oil drain plug. I would like to replace stock plug with one that has a magnet. Does anybody know the plug size and tread type:ummm:
  11. S

    Replacing Drain Valve o-ring.

    So I discovered my damn drain valve is leaky. Not terrible but it is dripping. I found a thread that explained how to service it, so the first thing I tried was tapping it with a hammer. It didnt help. It leaks in the off position, doesnt in the on. My guess is, if the o-ring isnt shot then its...
  12. maleko89

    Lost my air compressor drain valve

    Can I just run to the hardware store to pick up a bolt to use temporarily? I ordered the new valve but it may take 6-8 weeks. It looks like the valve drain is 25/64 but am unsure of the thread pitch. Is this a common bolt size?
  13. 44 magnum

    Parasitic Battery Drain

    Hey guys, I sent this as a PM but my recipient has a few too many msg's. A little help for the Dumb Kid here please? :) Looks like i have one HELL of an electric sucker fish on the bike. With the key off, I'm getting 10 VDC between the positive batt term and the bike's positive lead...
  14. dannymax

    Drain **** valve assembly

    This is a pic of the drain **** valve assembly. There have been different posts on where the on/off positions are located. When changing coolant this valve is turned to the "ON" position to properly drain all the coolant, and to the "OFF" position after coolant change is completed. The...
  15. ZRX/V-MAX

    is there an easy way to drain the clutch line?

    I have a braided clutch line to add, and I'm looking over the stock setup with the way it snakes all along the frame in various hangers. I'd really like to not dribble brake fluid all ove the left side of my bike. I guess I could try and bleed most of the fluid out of the line, but it still...
  16. gamorg02

    Magnet Oil Drain plug....

    Whats your guys takes on magnetic oil drain plugs? I see python has one for $25..... waste of time or has decent qualities?
  17. mabdcmb@yahoo.com

    Voltage Drain

    OK, this is a question for a friend. Its not about a Vmax. Its about a ...gulp......sportster. He has an '05 883c. We put a 1250 big bore kit on it this winter. Runs fine. His trouble is that he has just put the 3rd battery in the bike. Its only 4 years old! I told him to try out Lankee's...
  18. RagingMain

    Drain Valve Leaking

    Hello All Is there an o-ring to fix the radiator drain valve? It is leaking pretty bad Thanks Cheers
  19. M

    oil drain plug

    I thought that I read /heard somewhre that there is a FACTORY, MAGNETIC oil drain plug from another motorcycle that will fit the max. Venture Maybe?? Does anybody know what bikel???
  20. J

    0.5 volt drain issue

    I have 97 max stock everyting. Ive got a .5 volt drain on system not running. I have traced it to a med size black wire. See picture attached. If you are sitting on your bike it will be the left side. The black wire going up the frame has continuity the frame. The black wire going down the frame...
Back
Top