end

Not to beat a dead horse but I am at a place called wit's end without a beer intermittent complete loss of ignition, tach swings left and the lights stay on ..... flubs comes back to life runs fine for 5 minutes and starts spitting again driving me nuts have tried every fix suggested on...

Out with 2 buddies last Saturday. One friend rides a BMW-K1200(gs?) and the other friend has a 1987 Honda CBR-1000f Hurricane. We were out tooling around quite slow. I got a bit bored of that and decided to launch the Max from a stoplight. We were all waiting for the light and I was...

Had to hurt. Probably old but just ran across it on Break.com Cheers

Hi all, I need some help. I disassmled my stock 1989 front end to do an R1 conversion. However, due to circumstances, this is being put off. I reassembled the front end and have two large, rubber washers left over. I have no idea where they go, and haven't found any diagrams or photos to help...

Does anyone know where to find an end cap like the one pictured here? http://p1.bikepics.com/pics/2007/05/13/bikepics-897201-800.jpg

Does anyone here have these or something similar? http://manicsalamander.com/bar_end_weight.htm Will these work for our bikes?

I am wanting to buy some bar end mirrors from Oberon. They come in sizes from 12mm to 22mm. I don't have a CLUE what size I should order!!!! Anyone know the correct size?

I have been looking for a place to buy the stock exhaust end caps, and haven't found anything, beside the really fansy/$$ ones on ebay. Can these be purchased seperately or do they come only as an assembly with the stock mufflers. I have a feeling that I will not be able to buy these...

I just purchased this pair of bar end mirrors from ebay for $45 with free shipping. They are designed to expand inside the handle bar but can be easily adapted for use on the 09 vmax by removing the xpandable portion from the mirrors and bolting directly to the end of the handle bar. This can...

I am in the process of adding 2000 R1 forks to my mAX. I'd like to know which springs I will need to re-spring the front end for the added weight. Thanks in advance.

finished the install of the bar end mirrors today they came out nice and Oberon products are first class. here are some pics of the finished product. Chris

Being sick of the view of my shoulders with the current mirrors plus the increased danger of not seeing behind properly, I invested in some el'cheapo bar mirrors. Now I can see behind and I prefer the look as I think it gives the bike another attitude.

My '01 Max has a bad front end wobble. My bike has 24,000 miles on it and the front tires does need to be replaced. I've owned two V-Max motorcycles, and I know the nature of the front end wobble --it "goes with the turf." However, my current wobble is worse than "normal" and am wondering if...

Putting a new starter clutch in my 95, and the center bolt that you take out has a wire that goes in the main shaft! What is it and does it hook to something? Thanks.

Has anybody tried and or use these on their trapps? If so, whats your opinion on power loss, sound level, are they worth it, etc. Thanks! http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=4402588&store=Main&catId=203&productId=p4402588&leafCatId=20302&mmyId=

OK guys, got a set of preliminary adapters ready. Still have some cosmetic things to address and go ahead with your input. We are going to thin the thickness up a bit since we think the current 10mm thick walls only need to be about 5mm thick. We are also going to make the pinch area longer with...

OK guys, got a set of preliminary adapters ready. Still have some cosmetic things to address and go ahead with your input. We are going to thin the thickness up a bit since we think the current 10mm thick walls only need to be about 5mm thick. We are also going to make the pinch area longer with...

http://cgi.ebay.com/ebaymotors/Motorcycles___1985-Yamaha-Vmax-VMX12-Custom-Black-Hot-Rod-Roadster_W0QQitemZ230313489163QQddnZMotorcyclesQQddiZ2283QQcmdZViewItemQQptZUS_motorcycles?hash=item230313489163&_trksid=p4506.c0.m245&_trkparms=65%3A7%7C39%3A1%7C240%3A1318 $2,600 takes it home. 2 hrs...

does anybody know where to get the aluminum end caps for stock exhaust? I just want a little more sound and look nice too. I saw the ones on ebay but does anybody know of any others?

R1 tail end help for my Max Hello everyone, I've had a great time reading up on these forums. I would like to see if anyone could help me. I have been wanting to put an R1/R6 tail on my Vmax. I thought I saw one a while back and the gentleman told me he put the complete subframe on. Does anyone...