fit

I've had this Tracy Designs "Gauntlet" mini fairing for as long as I had the Max. I never really got it to fit right, and most of it's 28 years were spent knocking around the garage, unused. I took another stab at it when I converted to drag bars last year, but it fit even worse. Had a...

The R1 uses the same Brake callipers from 2008 to 2012 models as the Gen II. Meaning same caliper and same 130mm mount spacing. Brembo has developed a Brembo caliper with a mounting bracket specifically or the R1 so you can mount a 108mm to a 130mm mount This also fits on the MT01 which you...

There have been quite a few inquiries lately about windscreens of various sizes, some wanted for complete wind protection while others just wanted a sportier look with minimal protection. Here is a start on a list that I will keep all the new listing in the first post for handy reference. Please...

How hard would it be to adapt a vrod solid front wheel to bolt on to my '92 Max?

Well, as you know. Harley Riders has the badass look. Beards, tattoos, etc. link below would be good conversation pieces if you rode up on your Vmax supporting tattoos like the link below. :punk: http://m.funnyordie.com/lists/2157ced488/belly-button-tattoos-a-surprisingly-bad-idea Let...

Worlds biggest NGK's Actually they are 500,000 volt and 230,000 volt transformer bushings. NGK makes the glass/porcelain ABB makes the whole bushing. These are on the conservator transformers I've been working on on a new sub in Louisiana.

How to make your air box fit tight I had trouble with my air box ocassionally popping off one carb or the other making the bike run bad before I discovered it had popped of one of my carbs. I could actually pull the air box off with my hands after all four clamps were tightened. Upon futher...

Saw this on ebay-mine is cracked so bad it is falling away.A friend said to make certain the 06 will fit on my 97.I actually only need the left side,not the side where the key goes...anyone have one? Cheers Philip

does anyone know what the largest tire i can fit on the back of my 93 vmax i thought it might of been 170/80/15 but i cant remember i really dont want to buy a tire and have it not fit. if someone could let me know that'd be great! thanx everyone and happy rideing!!!! spring is hear...

Does anyone know if you could put a fjr1300 rear and front rim on a vmax? The fjr1300 is a shaft drive dont kow how they would line up?:punk:

Hi guys. Im in the need of some goof advice here... I have a leak on my stock radiator and im gonna get that fixed but in the process to find another one i got across with an opportunity to fit a R1 curved one... The question is... Is it possible? I like the curved ones and if the fix on my...

ive got a set of 8 mm plug wires another deal on e bay they fit in the plug end fine then i tried the coil push shove grunt cramp wd 40 them more twist wiggle 2 1/2 hours later no new wire seller says will fit have sold hundreds all customers happy all but me i wasn,t drinking or smoking or...

Tried to install new headlight and bottom bolt was 2mm larger than the hole. Removed sleeve shown in picture two and it bolted up. Did yamaha go with a smaller bolt after 85?

I am going to be getting my cylinder bored out to fit stock venture pistons in my bike and was wondering if anyone knew what the piston to cylinder space was supposed to be. Found a shop that will bore and deck my case for $300 , not bad I think. They use a cool CNC machine to do most of their...

will the carbs from a 98 vmax fit and work on my 92 vmax without any modifications ? :ummm:

Hey guys, just installed a K&N on a 04 vmax and when I went to close up the airbox, I was surprised to see that there was about a 3/16 gap all around the airbox lid. So I checked and double checked that there was'nt anything restricting the lid or the filter from sitting correctly. I had to...

Ive been thinking of putting "clip on" handle bars on my Max so I lean over it a bit more,Get a little more use out of my wind screen and look a little less rigid while riding.I dont want to spend $150 buying new ones so does ANYONE know what modern clip on bars will fit the stock fork diameter...

Just curious if I can swap the later model bigger rotors and calipers from a 93 and later to a 90? thanks.

Well I'm sick of the backpack now and I can't afford the hard bags. I'd like to get either some textile or leather saddlebags that will fit the Max. I plan on doing the relocate for the turn signals so now I need to find some bags. I have Supertrapps on the bike and they seem to point up-wards...

the belly pan from fat max is in the paint shop and just ordered the frame braces from exactrep, didn't think about if they would both bolt up without drilling and tapping new holes in frame, thanks for any info. dave magoo